Ordinary Release Bearing 23265-70C00
The DUHUI 23265-70C00 ordinary release bearing is a direct replacement engineered for NISSAN and SUZUKI applications. This release bearing matches OE specifications including 23265-70C00 and cross-references with SKF VKC3564, LUK 500051260, and SACHS 3151818001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 23265-70C00 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 18.00 mm (0.709 inch) |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 23265-70C00, 23265-80D00
Reference Numbers (Interchange):
SKF: VKC3564
Timken: RCTS338SA4, FCR50-30-14/2E
LUK: 500051260
SACHS: 3151818001
Vehicle Fitment
NISSAN: Various models
SUZUKI: BALENO (EG) 1.6 i 16V 4×4 (SY416) 1995-2002, LIANA (ER, RH_) 1.3 (RH 413) 2002-, SAMURAI Closed Off-Road Vehicle (SJ_) 1.0 (SJ 410) 1988-2004
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- 35 mm inside diameter and 62 mm outside diameter match NISSAN and SUZUKI clutch system specifications.
- OE-match design with dual OE number interchange: 23265-70C00 and 23265-80D00.
- Push-type release bearing configuration compatible with original clutch systems.
- Extensive cross-reference coverage: SKF VKC3564, LUK 500051260, SACHS 3151818001.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to NISSAN or SUZUKI factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
