Ordinary Release Bearing 1863815001
The DUHUI 1863815001 ordinary release bearing is a direct replacement engineered for HONDA CIVIC I and II applications. This release bearing matches OE specifications including 22810-PB7-000 and cross-references with SKF VKC3503, LUK 500023860, and SACHS 1863815001.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 1863815001 |
| Warranty | 2 years / 50,000 km |
| Type | Push-type |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 22810-PB7-000, 22810-PB7-010, 22810-634-010, 22810-634-000, 22810-671-000
Reference Numbers (Interchange):
SKF: VKC3503
Timken: HN1719-C
LUK: 500023860
SACHS: 1863815001
Vehicle Fitment
HONDA: CIVIC I Hatchback (SB) 1200 (SB1) 1972-1977, CIVIC I Saloon (SF) 1300 1979-1984, CIVIC II Hatchback (SS, SL) 1300 L (SS) 1979-1983
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-match design for HONDA CIVIC I and II applications.
- Push-type release bearing configuration compatible with original clutch systems.
- Cross-references with SKF VKC3503, LUK 500023860, and SACHS 1863815001.
- Multiple OE number interchange including 22810-PB7-000, 22810-PB7-010, and 22810-634-010.
- Interchange number: HN1719-C.
- Factory pre-lubricated with high-temperature grease for immediate installation.
Installation Notes
- Inspect the clutch fork and pivot ball for wear before installing the new release bearing.
- Clean the input shaft sleeve thoroughly and check for scoring or burrs that could damage the bearing.
- Apply a light coat of high-temperature grease to the sleeve contact surface – avoid over-greasing.
- Torque the retaining bolts to HONDA factory specifications for secure attachment.
- Confirm clutch slave cylinder pushrod travel is within factory range to avoid over-travel.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
