Oil Seal 9031142012
The DUHUI Oil Seal 90311-42012 is a precision-engineered sealing component designed for Toyota and Lexus applications. This oil seal features dimensions of 42 mm inner diameter, 60 mm outer diameter, and 7 mm width, constructed from SIL (silicone) material in brown color, matching OE specification 90311-42012. It is directly interchangeable with OE numbers 90311-42045 and 90311-42007.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 90311-42012 |
| Inside Diameter (ID) | 42.00 mm (1.654 inch) |
| Outside Diameter (OD) | 60.00 mm (2.362 inch) |
| Width | 7.00 mm (0.276 inch) |
| Material | SIL (Silicone) |
| Color | Brown |
| Product Type | Oil Seal / Shaft Seal |
Note: Dimensional data is based on available sources. This is an oil seal designed for Toyota and Lexus applications. Please verify measurements against your original part before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 90311-42012, 90311-42045, 90311-42007, 90311-A0005
Reference Numbers (Interchange):
TOYOTA: 90311-42012, 90311-42045, 90311-42007, 90311-A0005
LEXUS: 90311-42012, 90311-42045
SKF: 12932
TIMKEN: 472186
NATIONAL: 710307
Vehicle Fitment
LEXUS: IS III (_E3_) 250 (GSE30_) – 2013-2015
TOYOTA: CROWN (_S17_) 2.5 T (JZS171) – 1999-2003
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Precision-engineered oil seal designed for Toyota and Lexus applications
- SIL (silicone) material provides excellent resistance to high temperatures and oils
- 42 mm inner diameter, 60 mm outer diameter, 7 mm width – direct OE replacement
- Direct interchange with OE numbers 90311-42012, 90311-42045, and 90311-42007
- Brown color for easy identification
- Manufactured to OE specifications for reliable sealing performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the oil seal or packaging
Installation Notes
- Verify dimensions (ID 42 mm, OD 60 mm, width 7 mm) against your original oil seal
- Confirm fitment for your specific Toyota or Lexus model and application
- Clean the shaft and housing bore thoroughly before installation
- Apply a thin coat of clean oil to the seal lip to prevent dry start damage
- Use a proper seal installer tool to avoid damaging the seal lip during installation
- Ensure the seal is installed with the correct orientation – lip facing the fluid side
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces oil seals and automotive components to OE specifications. Contact us
