Oil Seal 9031138067
The DUHUI Oil Seal 90311-38067 is a precision-engineered sealing component designed for Toyota applications. This oil seal features dimensions of 38 mm inner diameter, 50 mm outer diameter, and 8 mm width, constructed from SIL (silicone) material in brown color, matching OE specification 90311-38067. It is directly interchangeable with OE numbers 90080-31072 and 90311-T0024.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 90311-38067 |
| Inside Diameter (ID) | 38.00 mm (1.496 inch) |
| Outside Diameter (OD) | 50.00 mm (1.969 inch) |
| Width | 8.00 mm (0.315 inch) |
| Material | SIL (Silicone) |
| Color | Brown |
| Product Type | Oil Seal / Shaft Seal |
Note: Dimensional data is based on available sources. This is an oil seal designed for Toyota applications. Please verify measurements against your original part before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 90311-38067, 90080-31072, 90311-T0024, 90311-38084, 90311-A0018
Reference Numbers (Interchange):
TOYOTA: 90311-38067, 90080-31072, 90311-T0024, 90311-38084, 90311-A0018
SKF: 12928
TIMKEN: 472182
NATIONAL: 710304
Vehicle Fitment
TOYOTA: CAMRY Saloon (_V3_) 2.4 (ACV30) – 2001-2006
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Precision-engineered oil seal designed for Toyota applications
- SIL (silicone) material provides excellent resistance to high temperatures and oils
- 38 mm inner diameter, 50 mm outer diameter, 8 mm width – direct OE replacement
- Direct interchange with OE numbers 90311-38067, 90080-31072, and 90311-T0024
- Brown color for easy identification
- Manufactured to OE specifications for reliable sealing performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the oil seal or packaging
Installation Notes
- Verify dimensions (ID 38 mm, OD 50 mm, width 8 mm) against your original oil seal
- Confirm fitment for your specific Toyota model and application
- Clean the shaft and housing bore thoroughly before installation
- Apply a thin coat of clean oil to the seal lip to prevent dry start damage
- Use a proper seal installer tool to avoid damaging the seal lip during installation
- Ensure the seal is installed with the correct orientation – lip facing the fluid side
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces oil seals and automotive components to OE specifications. Contact us
