KK22056 Wheel Hub Bearing For TOYOTA
The DUHUI KK22056 wheel hub bearing is a direct-fit front axle replacement designed for Toyota Corolla (_E11_) models from 1997 to 1999. This front wheel hub bearing meets OE reference KK22056, delivering reliable performance in the aftermarket. It features a 4-bolt flange with an integrated 48-tooth ABS ring for precise wheel speed detection.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01499 |
| Part Number | KK22056 |
| Position | Front Axle |
| Outer Diameter | 63.30 mm (2.492 inch) |
| Height | 110.00 mm (4.331 inch) |
| Bolt Holes | 4 |
| Bolt Hole Spacing | 71.00 mm (2.795 inch) |
| ABS Ring Teeth | 48 |
| ABS Sensor | Equipped |
Note: This front wheel hub bearing features a 4-bolt flange with 71mm bolt hole spacing and an integrated 48-tooth ABS tone ring. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01499
OE Numbers: KK22056
Reference Numbers (Interchange):
TOYOTA: KK22056
4X4 ESTANFI: EST4422056
ASHIKA: 4422056
JAPANPARTS: KK22056
Vehicle Fitment
TOYOTA: Corolla (_E11_) 1.4 (EE111_, EE111R) (1997-1999)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for Toyota Corolla (_E11_) applications
- Integrated 48-tooth ABS tone ring for seamless compatibility with vehicle ABS systems
- 4-bolt flange design with 71mm bolt hole spacing for precise fitment
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE reference KK22056 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE reference KK22056 on your original bearing before installation
- Confirm the 4-bolt flange with 71mm bolt hole spacing matches your Toyota Corolla front hub
- Ensure the ABS sensor is properly aligned with the 48-tooth tone ring during installation
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Toyota service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
