KK21035 Wheel Hub Bearing For Nissan
The DUHUI KK21035 wheel hub bearing is a direct-fit rear axle replacement designed for Nissan Tiida, Cube, and related models. This rear wheel hub bearing meets OE specification KK21035 and is also cross-referenced with Nissan part number 43202ED510, delivering reliable performance in the aftermarket. It features a 4-bolt flange design with an integrated 96-tooth ABS ring and magnetic sensor for seamless compatibility with vehicle safety systems [citation:0].
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01509 |
| Part Number | KK21035 |
| Position | Rear Axle |
| Outer Diameter 1 | 148.00 mm (5.827 inch) |
| Height 1 | 105.00 mm (4.134 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Bolt Holes | 4 |
| Joint Flange Count | 4 |
| ABS Ring Teeth | 96 |
| Thread Size | M12 x 1.25 |
| Weight | 3.18 kg (7.01 lbs) |
| ABS Sensor | Equipped (with integrated wheel bearing) |
Note: This rear wheel hub bearing features a 4-bolt flange with 114.3mm bolt circle and an integrated 96-tooth ABS ring. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01509
OE Numbers: KK21035, 43202ED510, 43202EL000, 43202ED51B, 43202AX600
Reference Numbers (Interchange):
NISSAN: KK21035, 43202ED510, 43202EL000
JAPANPARTS: KK21035
WH1462, 962206, 051137B
R16897, N4711073
ADN18373, 421086
Vehicle Fitment
NISSAN: Cube (Z12) 1.6 16V (2009-present)
NISSAN: Tiida Hatchback (C11) 1.5 (2004-2012), Tiida Hatchback 1.5 dCi (2007-2013), Tiida Hatchback 1.6 (2007-2011), Tiida Hatchback 1.8 (2004-2011)
NISSAN: Tiida Saloon (SC11) 1.5 dCi (2007-2012), Tiida Saloon 1.6 (2007-2012), Tiida Saloon 1.8 (2007-2012)
NISSAN: Bluebird Sylphy (G11)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for Nissan Tiida and Cube applications
- Integrated 96-tooth ABS tone ring for precise wheel speed detection and seamless ABS compatibility
- 4-bolt flange design with 114.3mm bolt circle for secure fitment
- 4-joint flange configuration provides enhanced stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers KK21035, 43202ED510, and 43202EL000 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches KK21035, 43202ED510, or 43202EL000 before installation
- Confirm rear axle fitment for your specific Nissan model (Tiida, Cube, or Bluebird Sylphy)
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the ABS sensor is properly aligned with the 96-tooth tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Nissan service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
