JP12049 Wheel Bearing For CHEVROLET
JP12049 Single Row Tapered Roller Wheel Bearing for Chevrolet
The JP12049 from DUHUI Bearing is a single-row tapered roller wheel bearing for Chevrolet applications. JP12049 is the cone reference used with the JP12010 cup as the JP12049/JP12010 matched bearing set.
Supply note: Confirm whether your order requires the JP12049 cone only or the complete JP12049/JP12010 bearing set.
JP12049 Tapered Roller Wheel Bearing Specifications
Note: The dimensions below refer to the JP12049/JP12010 matched set. Verify the measurements and supply scope against the original bearing before ordering.
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2490 |
| Part Number | JP12049 |
| Bearing Type | Single-row tapered roller bearing |
| Product Type Category | Standard Bearings > Tapered Roller Bearings > Single Row Tapered Roller Bearings |
| Application Category | Automotive > Wheel Bearings |
| Cataloged Matched Set | JP12049/JP12010 |
| Inside Diameter | 120.00 mm / 4.724 in |
| Outside Diameter | 170.00 mm / 6.693 in |
| Overall Width | 27.00 mm / 1.063 in |
The 120.00 mm bore is the critical shaft-fit dimension for this tapered roller wheel bearing. Confirm the 170.00 mm cup seat, 27.00 mm overall width, and cone-and-cup arrangement against the removed wheel-end bearing.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
Part Numbers and Cross References
DH Code
DWB2489
Reference Numbers (Interchange)
Fersa: JP12049/10
Timken: JP12049/JP12010
Application Verification
CHEVROLET: Wheel bearing applications. Verify the vehicle model, production year, axle configuration, installation position, original bearing number, and dimensions before ordering.
Product Features
- Single-row tapered roller design. The tapered roller geometry supports combined radial and axial loads in a matched wheel-end assembly.
- 120 x 170 x 27 mm matched-set envelope. The key dimensions support direct comparison with the original cone, cup, shaft, and housing.
- Separable cone-and-cup construction. JP12049 is the cone reference and JP12010 is the corresponding cup reference.
- Established interchange references. Fersa JP12049/10 and Timken JP12049/JP12010 assist replacement-part identification.
Installation Notes
- Confirm the supply scope. Verify whether the order includes the JP12010 cup or the JP12049 cone only.
- Compare the original bearing. Check the 120.00 mm bore, 170.00 mm outside diameter, 27.00 mm overall width, and wheel-end position before installation.
- Keep the cone and cup matched. Do not combine a new cone with a worn or incompatible cup.
- Inspect mounting surfaces. Check the shaft, cup seat, and housing for wear, scoring, corrosion, or distortion before fitting the bearing.
- Follow the vehicle procedure. Apply force only through the ring being fitted and use the vehicle manufacturer’s specifications for lubrication, bearing adjustment, end play, and fastener torque.
Product and Packaging Customization
DUHUI Bearing accepts product and packaging customization for approved B2B order quantities.
- Product marking: Custom logo, part number, graphic, or text.
- Packaging: Plastic bag, white box, color box, carton, or pallet.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI supplies single-row tapered roller wheel bearing products for automotive aftermarket applications. Contact us to confirm your application.
For fitment confirmation, compare the original bearing number, cone-and-cup references, dimensions, and wheel-end position before ordering.
