Hydraulic Release Bearing 5679344
The DUHUI 5679344 hydraulic release bearing is a direct OE-replacement component designed for ALFA ROMEO, CADILLAC, OPEL, and SAAB models with 1.6 to 3.2 liter engines from 2000 to 2017. This hydraulic clutch release bearing matches OE specifications including 5679344 and cross-references with 510009610, ZA34036A1, 3182600130, 24422064, and 93186759.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DH13-0041 |
| Part Number | 5679344 |
| Type | Hydraulic |
| Warranty | 2 years / 50,000 km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DH13-0041
OE Numbers: 5679344, 510009610, ZA34036A1, 3182600130, 24422064, 93186759
Vehicle Fitment
ALFA ROMEO: 159 (939_) 3.2 JTS Q4 (939AXH1B, 939AXG22) 2005-2011
ALFA ROMEO: 159 Sportwagon (939_) 2.0 JTDM (939BXP1B) 2009-2011
ALFA ROMEO: Brera (939_) 2.0 JTDM (939DXP1B) 2009-2010
OPEL: Antara A (L07) 2.0 CDTI 2016-2017
OPEL: Signum Hatchback (Z03) 1.8 (F48) 2005-2008
OPEL: Vectra C (Z02) 1.6 (F69) 2005-2008
SAAB: 9-3 (YS3D) 2.2 TiD 2000-2002
SAAB: 9-3 Convertible (YS3F) 1.8t BioPower 2007-2015
SAAB: 9-3 Estate (E50) 1.8 t 2005-2015
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Hydraulic release bearing engineered for ALFA ROMEO, CADILLAC, OPEL, and SAAB clutch systems.
- OE-match design with multiple OE number interchange: 5679344, 510009610, ZA34036A1, 3182600130, 24422064, and 93186759.
- Integrated hydraulic actuation – eliminates mechanical linkage.
- Factory pre-lubricated and sealed for extended service life.
- 2-year / 50,000 km warranty for aftermarket assurance.
Installation Notes
- Inspect the clutch fork and guide sleeve for wear before installing the new hydraulic release bearing.
- Clean the transmission input shaft sleeve thoroughly and check for scoring or burrs.
- Do not depress the clutch pedal before the hydraulic system is fully bled.
- Bleed the hydraulic system completely after installation to remove air.
- Torque the retaining bolts to manufacturer factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces hydraulic release bearings to OE specifications. Contact us
