HUB2835 Wheel Hub Bearing For BYD
The DUHUI HUB2835 wheel hub bearing is a direct-fit rear axle replacement designed for BYD F6 models. This rear wheel hub bearing meets OE specifications HUB2835 and 512188, delivering reliable performance in the aftermarket. It features an integrated ABS tone ring sensor for compatibility with vehicle ABS systems.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0854 |
| Part Number | HUB2835 / 512188 |
| Position | Rear Axle |
| Flange Diameter | 139.45 mm (5.490 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 64.01 mm (2.520 inch) |
| Brake Pilot Diameter | 64.01 mm (2.520 inch) |
| Flange Offset | 55.88 mm (2.200 inch) |
| Hub Pilot Diameter | 80.52 mm (3.170 inch) |
| Bolt Size | M12 x 1.5 |
| Bolt Quantity | 5 |
| ABS Sensor | Has ABS with Tone Ring Sensor |
Note: This rear wheel hub bearing assembly features a 5-bolt flange with M12 x 1.5 wheel studs and an integrated ABS tone ring. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0854
OE Numbers: HUB2835, 512188
Reference Numbers (Interchange):
BYD: HUB2835, 512188
Vehicle Fitment
BYD: F6 (rear axle)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for BYD F6 models
- Integrated ABS tone ring sensor for seamless compatibility with vehicle ABS systems
- 5-bolt flange design with M12 x 1.5 wheel studs provides enhanced load distribution
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers HUB2835 and 512188 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches HUB2835 or 512188 before installation
- Confirm rear axle fitment for your specific BYD F6 model
- Ensure the ABS sensor is properly aligned with the tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to BYD service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
