HUB04232(82) Wheel Hub Bearing For Nissan
The DUHUI HUB04232(82) wheel hub bearing is a direct-fit rear axle replacement designed for Nissan Altima, Stanza, and Axxess models without ABS. This rear wheel hub bearing meets OE specifications HUB04232(82), 432001E400, and 432009B010, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01577 |
| Part Number | HUB04232(82) |
| Position | Rear Axle |
| Flange Diameter | 148.40 mm (5.843 inch) |
| Bolt Circle Diameter | 137.16 mm (5.400 inch) |
| Wheel Pilot Diameter | 65.93 mm (2.596 inch) |
| Brake Pilot Diameter | 67.97 mm (2.676 inch) |
| Flange Offset | 48.99 mm (1.929 inch) |
| Hub Pilot Diameter | 73.30 mm (2.886 inch) |
| Bolt Size | M12 x 1.5 |
| Bolt Quantity | 4 |
| ABS Sensor | Not Included |
Note: This rear wheel hub bearing assembly features a 4-bolt flange with M12 x 1.5 wheel studs and does not include an integral ABS sensor. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01577
OE Numbers: HUB04232(82), 432001E400, 432009B010
Reference Numbers (Interchange):
NISSAN: 432001E400, 432009B010
FKG: F7136
HUB04232(82)
Vehicle Fitment
NISSAN: Altima (1993-2001, Non-ABS), Axxess (1990-1991, FWD), Stanza (1990-1992)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for Nissan Altima, Stanza, and Axxess models without ABS
- 4-bolt flange design with M12 x 1.5 wheel studs
- Non-ABS configuration – confirm vehicle ABS status before ordering
- Double-row bearing design provides stable load distribution and minimizes vibration
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers HUB04232(82), 432001E400, and 432009B010 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches HUB04232(82), 432001E400, or 432009B010 before installation
- This is a non-ABS hub assembly – confirm your vehicle does not have ABS before ordering
- Confirm the 4-bolt flange matches your Nissan rear hub
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Nissan service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
