HM88648/10 Wheel Bearing
The DUHUI Bearing HM88648/10 wheel bearing is an inch-series single-row tapered roller bearing with a 35.717 mm bore, 72.233 mm outer diameter, and 25.4 mm total width. Designed for automotive drivetrain and wheel hub applications, this bearing supports combined radial and axial loads in transmissions, differentials, and axle positions. It matches OE specification HM88648/10 and is cross-referenced with Fersa HM 88648/10.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2557 |
| Part Number | HM88648/10 |
| Product Type | Tapered Roller Bearing – Single Row, Inch Series |
| Bore Diameter (d) | 35.72 mm (1.406 inch) |
| Outer Diameter (D) | 72.23 mm (2.844 inch) |
| Total Width (T) | 25.40 mm (1.000 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 0.47 kg (1.03 lb) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2557
OE Numbers:
HM88648/10
Reference Numbers (Interchange):
Fersa: HM 88648/10
Vehicle Fitment
This bearing is used in automotive drivetrain and wheel hub applications. Please verify fitment with your original part before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for automotive transmission, differential, and wheel hub applications.
- Inch-series configuration with 35.717 mm bore and 72.233 mm outer diameter matches Fersa HM 88648/10 for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated GCr15 bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance.
- Cross-referenced with Fersa HM 88648/10 – confirmed interchange available.
Installation Notes
- Confirm bore diameter (35.717 mm) and outer diameter (72.233 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for drivetrain and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the vehicle service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
