HB206FF Center Support Bearing For CHEVROLET FORD
The DUHUI Bearing HB206FF driveshaft center support bearing (also known as a carrier bearing or bracket bearing) is an OE-replacement component for a wide range of Chevrolet and Ford vehicles, including heavy-duty trucks. This bearing supports the driveshaft at its midpoint, maintaining proper alignment between the transmission and rear axle to reduce vibration and driveline stress. Manufactured to match original equipment specifications including HB206FF, F5TA4800A, and 15512195, this bearing delivers reliable performance for compatible GM and Ford vehicles.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | HB206FF |
| Product Type | Driveshaft Center Support Bearing |
| Bore Inside Diameter | 30.00 mm (1.181 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 16.00 mm (0.630 inch) |
| Bushing Material | Rubber |
| Bracket Included | Yes |
| Mounting Hole Quantity | 2 |
| Bracket Style | 2-Bolt Flange |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers:
HB206FF, F5TA4800A, F4TZ4800A, F5TA4800AA, 15512195, 210580X, 3827424, 3860801, 907794, D600
Reference Numbers (Interchange):
Timken: HB206FF
National: HB206FF
SKF: HB206FF
Dorman: 662-013
Spicer: 210580X
Vehicle Fitment
CHEVROLET: Bel Air 1959-1975, 1981; Biscayne 1959-1972; Caprice 1966-1982; C/K Pickup 1961-1974; Impala 1959-1982; Suburban 1968-1974
FORD: F-250 1999-2003, F-350 Super Duty 1999-2003, E-Series Van 1999-2003
Engine Compatibility: 5.3L V8, 5.4L V8, 6.8L V10, 7.3L Diesel (applicable for Super Duty models)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- OE-replacement center support bearing for Chevrolet and Ford truck applications. Matches OEM specifications including HB206FF and F5TA4800A.
- 30 mm bore and 62 mm outside diameter provide exact fitment for the driveshaft support system.
- Premium-grade steel construction with controlled heat treating for lasting performance and extended bearing life [citation:6].
- Precision-manufactured bearing meets or exceeds OEM load rating requirements [citation:6].
- Special seal designs help keep lubrication in and contamination out, protecting internal bearing components [citation:2].
Installation Notes
- Verify the 30 mm bore diameter and 62 mm outside diameter match your original bearing before installation.
- Inspect the driveshaft surface for wear or damage where the bearing seats.
- Check the rubber bushing for proper flexibility – replace if cracked or hardened.
- Torque the mounting bolts to manufacturer specifications (refer to the service manual for your specific vehicle).
- After installation, check for proper driveshaft alignment and smooth rotation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces center support bearings and automotive components to OE specifications. Contact us
