F801806 Wheel Bearing For Mercedes Benz
The DUHUI Bearing F801806 is a double-row spherical roller bearing designed for heavy-duty applications requiring high radial load capacity and self-aligning capability. With a 110 mm bore, 180 mm outer diameter, and 82 mm width, this bearing accommodates shaft misalignment and is used in commercial vehicle drivetrain and concrete mixer gearbox applications. It matches Mercedes-Benz OE specification F801806 and is cross-referenced with FAG F-801806.PRL and ZF P5300 gearbox applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2610 |
| Part Number | F801806 |
| Product Type | Spherical Roller Bearing – Double Row |
| Bore Diameter (d) | 110.00 mm (4.331 inch) |
| Outer Diameter (D) | 180.00 mm (7.087 inch) |
| Width (B) | 82.00 mm (3.228 inch) |
| Dynamic Load Rating (Cr) | 380.0 kN (85,430 lbf) |
| Static Load Rating (C0r) | – |
| Grease Limit Speed | 500 rpm |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 8.00 kg (17.64 lb) |
Note: Dimensional and performance data is based on FAG published specifications for the F-801806.PRL series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2610
OE Numbers:
F801806
Reference Numbers (Interchange):
FAG: F-801806.PRL
FAG: F801806
FAG: F-801806
Vehicle Fitment
MERCEDES-BENZ: Various commercial vehicle models (verify OE number and dimensions before ordering)
ZF P5300 Gearbox: Concrete mixer and heavy-duty industrial applications
Concrete Mixer Applications: Imported concrete mixers with drum capacities from 5 to 12 cubic meters
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row spherical roller design with asymmetrical roller arrangement – accommodates shaft misalignment up to 2 degrees and handles radial loads with bidirectional axial load capacity.
- Metric-series configuration with 110 mm bore and 180 mm outer diameter matches FAG F-801806.PRL for direct replacement.
- Self-aligning capability reduces stress on bearings and housings – suitable for applications where shaft deflection or misalignment may occur.
- Heat-treated bearing steel with precision-ground raceways – rated for 380 kN dynamic load for demanding commercial vehicle and industrial applications.
- Open-type configuration with outer ring groove and lubrication holes – supports grease or oil lubrication systems.
- Cross-referenced with FAG F-801806.PRL and ZF P5300 gearbox applications – confirmed interchange available.
Installation Notes
- Confirm bore diameter (110.00 mm) and outer diameter (180.00 mm) match your existing bearing and housing before installation.
- This bearing is a double-row spherical roller design – install as a unit with proper alignment of the inner and outer rings.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- This bearing is typically installed with shaft seals (125x180x12/15) – ensure seals are replaced during installation.
- Lubricate with high-quality grease or oil – refer to the vehicle or equipment service manual for viscosity grade and lubrication method.
- For concrete mixer applications (ZF P5300 gearbox), follow ZF service manual specifications for bearing preload and torque settings.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces spherical roller bearings and automotive components to OE specifications. Contact us
