F61011321L142 Wheel Hub Bearing For GEELY
The DUHUI F61011321L142 wheel hub bearing is a direct-fit front axle replacement designed for GEELY Boyue (left-hand side) models. This front wheel hub bearing meets OE specification F61011321L142 and features an integrated ABS sensor, delivering reliable performance in the aftermarket. It is equipped with a 96-tooth ABS ring for precise wheel speed detection.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1226 |
| Part Number | F61011321L142 |
| Position | Front Axle |
| Side | Left |
| Outer Diameter | 151.80 mm (5.976 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Bolt Holes | 5 |
| ABS Ring Teeth | 96 |
| ABS Sensor | Integrated |
Note: This front wheel hub bearing features a 5-bolt flange with 114.3mm bolt circle, 96-tooth ABS ring, and integrated ABS sensor. This is a left-side specific assembly. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1226
OE Numbers: F61011321L142
Reference Numbers (Interchange):
GEELY: F61011321L142
Vehicle Fitment
GEELY: Boyue (left-hand side)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered specifically for GEELY Boyue left-side applications
- Integrated ABS sensor with 96-tooth tone ring for precise wheel speed detection
- 5-bolt flange design with 114.3mm bolt circle for enhanced load distribution
- Left-side specific fitment for precise installation
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE number F61011321L142 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number F61011321L142 on your original bearing before installation
- Confirm this is the left-side front axle bearing for your GEELY Boyue model
- Ensure correct orientation – this bearing is side-specific (left)
- This is an integrated ABS hub assembly – ensure proper connection to the vehicle’s ABS wiring
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to GEELY service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
