EG3502401 Wheel Hub Bearing For ACURA HONDA BYD
The DUHUI EG3502401 wheel hub bearing is a direct-fit rear axle replacement designed for Acura TL, Honda Accord, and BYD F6 models. This rear wheel hub bearing meets OE specifications EG3502401 and EG3502402, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01262 |
| Part Number | EG3502401 |
| Inner Diameter | 32.00 mm (1.260 inch) |
| Outer Diameter | 140.00 mm (5.512 inch) |
| Width | 59.00 mm (2.323 inch) |
| Bolt Holes | 5 |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| ABS Sensor | Included (tone ring) |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01262
OE Numbers: EG3502401, EG3502402
Reference Numbers (Interchange):
HUB283-5: EG3502401, EG3502402
Vehicle Fitment
ACURA: TL (2004-2008)
HONDA: Accord (2003-2007)
BYD: F6
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for Acura TL, Honda Accord, and BYD F6 models
- Integrated ABS tone ring for precise wheel speed signaling – compatible with factory ABS systems
- 5-bolt flange with 114.3mm bolt circle for exact chassis alignment
- Factory-sealed and pre-lubricated – no routine maintenance required
- Direct interchange with OE numbers EG3502401 and EG3502402 for straightforward replacement
Installation Notes
- Verify the OE number on your original bearing matches EG3502401 or EG3502402 before installation
- Confirm rear axle fitment for your specific Acura TL, Honda Accord, or BYD F6 model
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to manufacturer service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
