DG4080WRKBSH2C4 Wheel Bearing For Suzuki
The DUHUI Bearing DG4080WRKBSH2C4 wheel bearing is a rear axle replacement bearing designed for Suzuki Grand Vitara I (FT, HT) models. This non-standard bearing features a 40 mm inner diameter, 80 mm outer diameter, and 23 mm width, supporting both radial and axial loads in the rear wheel hub assembly. The DG4080WRKBSH2C4 matches Suzuki OE specifications including 4348565D00, 4359165D00, and 4359165D00S1, with cross-references to Koyo, FEBI Bilstein, and other major aftermarket brands.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2569 |
| Part Number | DG4080WRKBSH2C4 |
| Product Type | Wheel Bearing – Non-Standard |
| Fitting Position | Rear Axle Left / Right |
| Inner Diameter (d) | 40.00 mm (1.575 inch) |
| Outer Diameter (D) | 80.00 mm (3.150 inch) |
| Width (B) | 23.00 mm (0.906 inch) |
| Width 1 (C) | 18.00 mm (0.709 inch) |
| Weight | 0.383 kg (0.844 lb) |
Note: Dimensional data is based on Koyo/JTEKT published specifications.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2569
OE Numbers:
4348565D00, 4359165D00, 4359165D00S1
Reference Numbers (Interchange):
Koyo: DG4080WRKBSH2C4
FEBI BILSTEIN: 175457
A.B.S.: 201321
BLUE PRINT: ADK88311
AUTOKIT: 0197300
JAPANPARTS: KK28014
Fersa Bearings: PW4080002318CSK2
Vehicle Fitment
SUZUKI GRAND VITARA I (FT, HT): 1.6 4×4 (SQ416) 2003-2005
SUZUKI GRAND VITARA I (FT, HT): 2.0 TD 4×4 (SQ 420D) 1998-2003
SUZUKI GRAND VITARA: 1999-2005
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Precision-engineered wheel bearing designed for Suzuki Grand Vitara I rear axle applications – verified fitment for 1998-2005 model years.
- Heat-treated bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance.
- Supports both radial and axial loads in the rear wheel hub assembly – carries vehicle weight and cornering loads while maintaining alignment.
- Cross-referenced with Koyo DG4080WRKBSH2C4, FEBI BILSTEIN 175457, and other major aftermarket brands – confirmed interchange available.
- Designed to withstand the strains and shocks of off-road driving common in Grand Vitara applications.
Installation Notes
- Confirm inner diameter (40.00 mm) and outer diameter (80.00 mm) match your original bearing before installation.
- This bearing is designed for rear axle fitment on Suzuki Grand Vitara I models – confirm left or right side placement before ordering.
- Press the bearing squarely into the hub – do not hammer directly on the bearing surfaces.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Torque all fasteners to Suzuki service manual specifications and replace the axle retainer nut during installation.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
