DG358026WRKBC4 Wheel Bearing For SUZUKI
The DUHUI Bearing DG358026WRKBC4 is a single-row ball bearing designed for the rear axle of Suzuki Vitara (ET, TA, TD), Vitara Cabrio, and X-90 models. With a 35 mm bore, 80 mm outer diameter, and 26 mm width, this bearing supports radial and axial loads in the rear wheel hub assembly . It matches Suzuki OE specifications including 09269-35010 and 09269-35010S1, with cross-references to Koyo DG358026WRKBC4 and SKF VKBA 3220 .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3571 |
| Part Number | DG358026WRKBC4 |
| Product Type | Wheel Bearing – Single Row Ball Bearing |
| Fitting Position | Rear Axle (Left/Right) |
| Inner Diameter (d) | 35.00 mm (1.378 inch) |
| Outer Diameter (D) | 80.00 mm (3.150 inch) |
| Width (B) | 26.00 mm (1.024 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 0.82 kg (1.81 lb) |
Note: Dimensional data is based on Koyo and manufacturer published specifications . Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3571
OE Numbers:
09269-35010, 09269-35010S1
Reference Numbers (Interchange):
Koyo: DG358026WRKBC4
SKF: VKBA 3220, VKBA 7553
SNR: R177.13
TIMKEN: 511004
TRISCAN: 8530 69205
BLUE PRINT: ADK88310
FEBI BILSTEIN: 177384
OPTIMAL: 972688
AUTOKIT: 01.98153
Vehicle Fitment
SUZUKI VITARA (ET, TA, TD): 1.6 (SE 416) 1991-1998
SUZUKI VITARA Cabrio (ET, TA): 1.6 (TA01, SE416) 1988-1995
SUZUKI X-90 (EL): 1.6 i 16V (SZ416) 1995-1997
Engine Compatibility: G16A, G16B 1.6L engines
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row ball bearing design supports both radial and axial loads in the rear wheel hub assembly – suitable for Suzuki Vitara and X-90 applications .
- Metric configuration with 35 mm bore and 80 mm outer diameter matches Koyo DG358026WRKBC4 and Suzuki OE 09269-35010 for direct replacement .
- Constructed from high-grade GCr15 bearing steel for superior load-bearing capacity and service life.
- Precision-ground raceways ensure consistent load distribution and wear resistance in demanding off-road applications.
- Cross-referenced with SKF VKBA 3220, SNR R177.13, and TRISCAN 8530 69205 – confirmed interchange available .
Installation Notes
- Confirm bore diameter (35.00 mm) and outer diameter (80.00 mm) match your existing bearing and housing before installation .
- This bearing is designed for rear axle fitment on Suzuki Vitara and X-90 – confirm placement before ordering.
- Inspect the hub surface and axle shaft for wear or damage before installing new components .
- When replacing rear wheel bearings on these models, both sides are typically replaced .
- Lubricate with high-quality wheel bearing grease and torque all fasteners to Suzuki service manual specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
