DG357222 Wheel Bearing For MARUTI
The DUHUI Bearing DG357222 is a single-row deep groove ball bearing designed for rear axle wheel hub positions on Maruti Gypsy 1.0 4×4 and compatible Suzuki off-road vehicles. This automotive wheel bearing features a 35 mm bore, 72 mm outer diameter, and 22 mm overall width, matching OE specification DG357222. It serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable rear wheel bearing solution.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3661 |
| Part Number | DG357222 |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 35.00 mm (1.378 inch) |
| Outer Diameter (D) | 72.00 mm (2.835 inch) |
| Overall Width (B) | 22.00 mm (0.866 inch) |
| Outer Ring Width (C) | 17.00 mm (0.669 inch) |
| Fitting Position | Rear Axle |
| Weight | 0.31 kg |
| Bearing Material | GCr15 – High Carbon Chrome Steel |
| Cage Material | Pressed Steel Cage |
Note: Dimensional data is based on manufacturer published specifications from KOYO, RICH, and PRORUN catalogs. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3661
OE Numbers:
DG357222
Reference Numbers (Interchange):
KOYO: DG357222DWC4
RICH: RD-357222 RW C4
IMB BEARINGS: DG357222
NSK: DG357222
SKF: DG357222
Vehicle Fitment
MARUTI GYPSY: 1.0 All-wheel Drive 1988-1998, MG410W
SUZUKI JIMNY: 1.3i 16V 1998-2008
SUZUKI SAMURAI: 1.3 JX 1993-2000
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance.
- Manufactured to OE specifications with GCr15 high-carbon chromium bearing steel for durability and fatigue resistance.
- Direct interchange with OE number DG357222 and multiple major brand equivalents including KOYO DG357222DWC4 and RICH RD-357222 RW C4.
- Precision-ground raceways and heat-treated components ensure consistent performance and extended service life.
- Pressed steel cage provides reliable ball guidance under load.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (35.00 mm) and outer diameter (72.00 mm) match your axle housing and shaft before installation.
- This bearing is designed for rear axle fitment – verify your vehicle requires this configuration before ordering.
- Inspect the axle shaft and housing surface for wear or damage before installing new components.
- Apply even pressure when pressing the bearing onto the axle shaft or into the housing – never apply force directly through the rolling elements.
- Pack the bearing with high-quality grease before installation if not pre-lubricated.
- Torque all fasteners to Maruti Suzuki service manual specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
