DACF3213668YA1 Wheel Hub Bearing For DONGFENG
The DUHUI DACF3213668YA1 wheel hub bearing is a direct-fit front axle replacement designed for DONGFENG C31 and C32 models. This front wheel hub bearing meets OE specifications DACF3213668YA1 and 3501610CA01, with dimensions of 32x136x77mm, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01270 |
| Part Number | DACF3213668YA1 |
| Position | Front Axle |
| Inner Diameter | 32.00 mm (1.260 inch) |
| Outer Diameter | 136.00 mm (5.354 inch) |
| Width | 77.00 mm (3.031 inch) |
Note: This front wheel hub bearing assembly features dimensions 32x136x77mm and is designed for DONGFENG C31/C32 commercial vehicle applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01270
OE Numbers: DACF3213668YA1, 3501610CA01
Reference Numbers (Interchange):
DONGFENG: DACF3213668YA1, 3501610CA01
32X136X77X5
Vehicle Fitment
DONGFENG: C31, C32
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered specifically for DONGFENG C31 and C32 commercial vehicle applications
- Precision dimensions: 32mm inner diameter, 136mm outer diameter, 77mm width
- Double-row bearing design provides stable load distribution and minimizes vibration
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers DACF3213668YA1 and 3501610CA01 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches DACF3213668YA1 or 3501610CA01 before installation
- Confirm front axle fitment for your specific DONGFENG model (C31 or C32)
- This is a front wheel hub bearing – ensure proper alignment with the drive axle
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to DONGFENG service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
