DAC40740040-2RZ Wheel Bearing For AUDI
The DUHUI Bearing DAC40740040-2RZ double-row wheel bearing is an OE-replacement solution for the Audi A3 (8L1) from 1996 to 2003, as well as other compatible Volkswagen Group vehicles. This double-row angular contact ball bearing features rubber seals on both sides (2RZ) for enhanced contamination protection and grease retention . Manufactured to match original equipment specifications including AUDI 1J0 498 625 and 1J0 498 625 A, this wheel bearing delivers reliable performance for compatible VW Group vehicles .
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB0416 | |
| Part Number | DAC40740040-2RZ | |
| Product Type | Double Row Angular Contact Ball Bearing | |
| Fitting Position | Front Axle | |
| Inner Diameter | 40.00 mm | 1.575 in |
| Outer Diameter | 74.00 mm | 2.913 in |
| Width | 40.00 mm | 1.575 in |
| Seal Type | 2RZ (Double Rubber Seal) | |
| Weight | 0.77 kg | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB0416
OE Numbers:
1J0 498 625, 1J0 498 625 A, 1J0 598 625
Reference Numbers (Interchange):
SKF: VKBA1371
FAG: 713616060
SNR: R169.10
MOOG: VOWB11006
OPTIMAL: 100001
QUINTON HAZELL: QWB702
A.B.S.: 200009
AIC: 51723S, 51723Set
AL-KO: 620865
Vehicle Fitment
AUDI A3 (8L1): 1.6 1996-2003
AUDI A3 (8L1): 1.8 20V 1996-2003
AUDI A3 (8L1): 1.8 T 1998-2003
AUDI A3 (8L1): 1.8 T quattro 1996-2003
Additional compatible models (verify before ordering):
VW: Golf IV (1J1) 1997-2004, Bora (1J2) 1998-2005, Beetle (9C) 1998-2010
SEAT: Leon (1M) 1999-2005, Toledo (1M) 1998-2004
SKODA: Octavia (1U) 1996-2004
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides stable load distribution and extended service life .
- 2RZ rubber seals on both sides provide effective contamination protection and grease retention.
- Manufactured from high-carbon chromium bearing steel (GCr15) for durability under load .
- Precision-ground raceways ensure smooth rotation and precise wheel guidance .
- Pre-lubricated and sealed design reduces maintenance requirements.
- Interchangeable with major brands including SKF, FAG, and SNR.
Installation Notes
- Confirm inner diameter is 40.00 mm (1.575 in), outer diameter is 74.00 mm (2.913 in), and width is 40.00 mm (1.575 in) before installation.
- Do not attempt to disassemble the wheel bearing unit or remove the seals – this will cause permanent damage .
- Press the bearing into the hub using appropriate tools – never strike with a hammer .
- Torque the hub nut to manufacturer specifications (refer to the Audi service manual) .
- Verify fitment for your specific VW Group model before ordering.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
