B1569D Wheel Bearing For MITSUBISHI
The DUHUI Bearing B1569D is a single-row ball bearing with a 15 mm bore, 35 mm outer diameter, and 13 mm width. Designed for automotive transmission and drivetrain applications, this bearing supports radial loads and moderate axial loads. It matches Mitsubishi OE specifications including S930P18301 and Nissan 23120-57300, with cross-references to SKF, NTN, and NSK equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3569 |
| Part Number | B1569D |
| Product Type | Single Row Ball Bearing |
| Bore Diameter (d) | 15.00 mm (0.591 inch) |
| Outer Diameter (D) | 35.00 mm (1.378 inch) |
| Width (B) | 13.00 mm (0.512 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3569
OE Numbers:
S930P18301, S930P18370, S930P64301, S930P64370, 23120-57300
Reference Numbers (Interchange):
SKF: B1569D
NTN: B1569D
NSK: B1569D
Vehicle Fitment
MITSUBISHI COLT III (C5_A): 1.8 Diesel GLX (C54A) 1988-1992
MITSUBISHI GALANT IV (A16_): 2.3 Turbo-D (A167) 1980-1984
MITSUBISHI L 300 / DELICA II Bus (LO3_P/G, L0_2P): 2.3 D (L038P) 1983-1986
NISSAN: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row ball bearing design supports radial and moderate axial loads – suitable for automotive transmission and drivetrain applications.
- Metric-series configuration with 15 mm bore and 35 mm outer diameter matches Mitsubishi OE S930P18301 and Nissan 23120-57300 for direct replacement.
- Heat-treated GCr15 bearing steel with precision-ground raceways ensures consistent performance and long service life.
- Open-type design supports splash lubrication and oil bath systems common in transmission applications.
- Cross-referenced with SKF, NTN, and NSK equivalents – confirmed interchange available.
Installation Notes
- Confirm bore diameter (15.00 mm) and outer diameter (35.00 mm) match your housing and shaft before installation.
- Inspect the shaft and housing for wear, scoring, or pitting – replace if damage is present.
- Apply appropriate lubricant (oil or grease) during installation – refer to your equipment manual for viscosity specifications.
- Ensure correct shaft and housing tolerances for optimal load distribution and service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces ball bearings and automotive components to OE specifications. Contact us
