ADBP820011 Wheel Hub Bearing For Toyota
The DUHUI ADBP820011 wheel hub bearing is a direct-fit rear axle replacement designed for Toyota Corolla (E21), Prius (W5), and compatible Lexus models. This rear wheel hub bearing meets OE specifications 4245076010 and 4245076020, delivering reliable performance in the aftermarket. It features a 5-bolt flange design with an integrated ABS sensor ring for precise fitment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01514 |
| Part Number | ADBP820011 |
| Position | Rear Axle |
| Inner Diameter 1 | 55.00 mm (2.165 inch) |
| Inner Diameter 2 | 75.90 mm (2.988 inch) |
| Outer Diameter | 135.00 mm (5.315 inch) |
| Bolt Holes | 5 |
| ABS Sensor | Equipped |
Note: This rear wheel hub bearing features a 5-bolt flange design with integrated ABS sensor. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01514
OE Numbers: 4245076010, 4245076020
Reference Numbers (Interchange):
TOYOTA: 4245076010, 4245076020
LEXUS: 4245076010, 4245076020
R169.117, 982311, 39040, JAPKK-22011, HA590413, 853013298
Vehicle Fitment
TOYOTA: Corolla Estate (E21) 1.2, 1.8 Hybrid (2019-present)
TOYOTA: Corolla Hatchback (E21) 1.2, 1.8 Hybrid, 2.0 (2018-present)
TOYOTA: Corolla Saloon (E21) 1.8 VVTi, 1.8 VVTi Hybrid, 2.0 VVT-iE Flex, 2.0 VVTi (2019-present)
TOYOTA: Prius (W5) 1.8 Hybrid (ZVW50, ZVW51) (2015-2022)
TOYOTA: Prius PHV (W52) 1.8 Plug-in Hybrid (ZVW52) (2016-2022)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for Toyota Corolla (E21) and Prius (W5) applications
- Integrated ABS sensor for seamless compatibility with vehicle ABS systems
- 5-bolt flange design for enhanced load distribution and stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 4245076010 and 4245076020 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 4245076010 or 4245076020 before installation
- Confirm the 5-bolt flange matches your vehicle’s rear hub
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the ABS sensor is properly aligned with the tone ring during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Toyota service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
