A2233340300 Wheel Hub Bearing For VW
The DUHUI A2233340300 wheel hub bearing is a direct-fit rear axle replacement designed for Volkswagen MQB platform vehicles. This rear wheel hub bearing references OE number 5QD501611B and features a 5-bolt flange with an integrated ABS sensor, delivering reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01295 |
| Part Number | A2233340300 |
| Reference OE | 5QD501611B |
| Position | Rear Axle (Axle Beam) |
| Outer Diameter | 136.50 mm (5.374 inch) |
| Bolt Holes | 5 |
| Spline Teeth | 32 |
| Thread Size | M14 x 1.5 |
| ABS Sensor | Integrated (43 teeth tone ring) |
| Bearing Type | Double row ball bearing |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01295
OE Numbers: A2233340300, 5QD501611B
Reference Numbers (Interchange):
VW: 5QD501611B, 5QD 501 611 B
TRULY0768: 5QD501611B
Vehicle Fitment
VOLKSWAGEN: MQB Platform vehicles including Passat B8, Magotan, Tiguan L, Teramont, Lamando, Sagitar, T-Roc, Tayron, CC (2018-2019)
AUDI: Q2L, Q3
SKODA: Octavia (2014-), Superb
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for VW MQB platform vehicles including Passat B8, Tiguan L, and Magotan
- Double row angular contact ball bearing design provides stable load distribution
- Integrated ABS magnetic sensor ring with 43-tooth tone ring for precise wheel speed signaling
- 5-bolt flange configuration for secure wheel attachment
- Simpler preload setup and installation process – no steering knuckle adjustment required
- Higher integration and stiffness enhancement compared to traditional designs
- Factory-sealed and pre-lubricated – no routine maintenance required
- Direct OE replacement with matching 5QD501611B specification
Installation Notes
- Verify the OE number on your original bearing matches 5QD501611B before installation
- This bearing is designed for rear axle beam mounting – confirm your vehicle’s rear axle configuration
- Designed for 2WD models – verify your vehicle’s drive configuration before ordering
- Check the condition of the ABS sensor ring and wheel speed sensor during installation
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to VW service manual specifications; over-torquing can shorten bearing life
- After installation, check ABS sensor clearance and rotate the hub to ensure smooth operation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
