A113301030BB Wheel Hub Bearing For CHERY
The DUHUI A113301030BB wheel hub bearing is a direct-fit rear axle replacement designed for Chery Amulet models without ABS. This rear wheel hub bearing meets OE specification A113301030BB, and features a 4-bolt flange with 100mm bolt circle for secure wheel attachment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0801 |
| Part Number | A113301030BB |
| Position | Rear Axle |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 120.00 mm (4.724 inch) |
| Bolt Circle | 100.00 mm (3.937 inch) |
| Bolt Holes | 4 |
| Thread Size | M12 x 1.5 |
| ABS Sensor | Not Included |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0801
OE Numbers: A113301030BB
Reference Numbers (Interchange):
CHERY: A113301030BB
Vehicle Fitment
CHERY: Amulet (without ABS)
Note: This bearing is configured without ABS sensor. Verify your vehicle’s ABS system before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for Chery Amulet models without ABS
- 4-bolt flange design with 100mm bolt circle for secure wheel attachment
- Configured without ABS sensor – suitable for non-ABS vehicle variants
- Precision roll-formed design ensures consistent and optimized factory-installed preload, minimizing excessive noise and wear
- Application-specific advanced raceway designs reduce stress, rotation and heat on components, extending service life
- Coated wheel bolts effectively prevent rust, ensuring smooth disassembly and accurate torque
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Factory-sealed and pre-lubricated – no routine maintenance required
Installation Notes
- Verify the OE number on your original bearing matches A113301030BB before installation
- Confirm rear axle fitment for your specific Chery Amulet model
- This bearing is configured without ABS sensor – verify your vehicle’s ABS system before ordering
- Check 4-bolt flange pattern with 100mm bolt circle and M12 x 1.5 threads matches your vehicle’s hub
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Chery service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
