88048/10 Wheel Bearing For TOYOTA
The DUHUI Bearing 88048/10 wheel bearing is an inch-series single-row tapered roller bearing designed for Toyota automotive drivetrain and wheel hub applications. With a 33.338 mm bore, 68.262 mm outer diameter, and 22.225 mm total width, this bearing supports combined radial and axial loads. It matches Toyota OE specification 88048/10 and is cross-referenced with SKF, Timken, and NTN equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2515 |
| Part Number | 88048/10 |
| Product Type | Tapered Roller Bearing – Single Row, Inch Series |
| Bore Diameter (d) | 33.34 mm (1.312 inch) |
| Outer Diameter (D) | 68.26 mm (2.688 inch) |
| Total Width (T) | 22.23 mm (0.875 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications for the 88048/10 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2515
OE Numbers:
88048/10
Reference Numbers (Interchange):
TOYOTA: 88048/10
Vehicle Fitment
TOYOTA: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for automotive drivetrain and wheel hub applications.
- Inch-series configuration with 33.338 mm bore and 68.262 mm outer diameter matches Toyota OE 88048/10 and Timken equivalents for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated GCr15 bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance.
- Open-type configuration supports splash lubrication systems common in axle and wheel hub applications.
Installation Notes
- Confirm bore diameter (33.338 mm) and outer diameter (68.262 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Single-row tapered roller bearings must be mounted in mirror-image arrangement with a second tapered roller bearing to accommodate axial loads in both directions.
- Set bearing preload according to Toyota manufacturer specifications – tapered rollers require proper adjustment for drivetrain and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the Toyota service manual for viscosity grade and lubrication method.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
