802048/11 Wheel Bearing For TOYOTA
The DUHUI Bearing 802048/11 wheel bearing is an inch-series single-row tapered roller bearing designed for Toyota automotive drivetrain and wheel hub applications. With a 41.275 mm bore, 82.55 mm outer diameter, and 26.54 mm total width, this bearing supports combined radial and axial loads. It matches Toyota OE specification 802048/11 and is cross-referenced with SKF M802048/011A, FAG KM802048-11, Fersa M802048/11, and PFI M802048/11 equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2516 |
| Part Number | 802048/11 |
| Product Type | Tapered Roller Bearing – Single Row, Inch Series |
| Bore Diameter (d) | 41.28 mm (1.625 inch) |
| Outer Diameter (D) | 82.55 mm (3.250 inch) |
| Total Width (T) | 26.54 mm (1.045 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 0.65 kg (1.44 lb) |
Note: Dimensional data is based on SKF, Fersa, and PFI published specifications for the 802048/11 and M802048/11 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2516
OE Numbers:
802048/11
Reference Numbers (Interchange):
SKF: M802048/011A, M802048/011/QCL7C
FAG: KM802048-11, KM802048.11
Fersa: M802048/11
PFI: M802048/11
Vehicle Fitment
TOYOTA: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for automotive drivetrain and wheel hub applications.
- Inch-series configuration with 41.275 mm bore and 82.55 mm outer diameter matches SKF M802048/011A, FAG KM802048-11, and Fersa M802048/11 for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated GCr15 bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance.
- Open-type configuration supports splash lubrication systems common in axle and wheel hub applications.
- Cross-referenced with Toyota OE 802048/11 and major aftermarket brands – confirmed interchange available.
Installation Notes
- Confirm bore diameter (41.275 mm) and outer diameter (82.55 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Single-row tapered roller bearings must be mounted in mirror-image arrangement with a second tapered roller bearing to accommodate axial loads in both directions.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for drivetrain and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the vehicle service manual for viscosity grade and lubrication method.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
