713626780 Wheel Hub Bearing For KIA
The DUHUI 713626780 wheel hub bearing is a direct-fit front axle replacement designed for Kia Picanto II (TA) models. This front wheel hub bearing meets OE specification 713626780 and is interchangeable with OE numbers 201623, 922361, and 8989, delivering reliable performance in the aftermarket. It features a 4-bolt flange design with an integrated 96-tooth ABS ring for seamless compatibility with vehicle safety systems.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01511 |
| Part Number | 713626780 |
| Position | Front Axle |
| Outer Diameter 1 | 148.00 mm (5.827 inch) |
| Height 1 | 105.00 mm (4.134 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Bolt Holes | 4 |
| Joint Flange Count | 4 |
| ABS Ring Teeth | 96 |
| Thread Size | M12 x 1.25 |
| Weight | 3.18 kg (7.01 lbs) |
| ABS Sensor | Equipped (with integrated wheel bearing) |
Note: This front wheel hub bearing features a 4-bolt flange with 114.3mm bolt circle and an integrated 96-tooth ABS ring. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01511
OE Numbers: 713626780, 201623, 922361, 8989
Reference Numbers (Interchange):
KIA: 201623, 922361, 8989
SKF: VKBA7591
R189.25
Vehicle Fitment
KIA: Picanto II (TA) 1.0 (2011-2017), Picanto II 1.0 Bi-Fuel (2011-2014), Picanto II 1.0 Flex (2011-2017), Picanto II 1.0 LPG (2013-2017), Picanto II 1.2 (2011-2017), Picanto Hatchback Van 1.0 (2014-present)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered specifically for Kia Picanto II (TA) applications
- Integrated 96-tooth ABS tone ring for precise wheel speed detection and seamless ABS compatibility
- 4-bolt flange design with 114.3mm bolt circle for secure fitment
- 4-joint flange configuration provides enhanced stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 713626780, 201623, 922361, and 8989 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 713626780, 201623, 922361, or 8989 before installation
- Confirm the 4-bolt flange with 114.3mm bolt circle matches your Kia Picanto front hub
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the ABS sensor is properly aligned with the 96-tooth tone ring during installation
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Kia service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
