6906-2RS Wheel Bearing For NISSAN FORD
The DUHUI Bearing 6906-2RS is a single-row deep groove ball bearing with a 30 mm bore, 47 mm outer diameter, and 9 mm width. This sealed bearing features contact seals on both sides for effective contamination protection, and is designed for automotive and industrial applications requiring low friction and high-speed capability. It matches OE specification 6906-2RS and is cross-referenced with SKF 61906-2RS1, NSK 6906DDU, and NTN 6906LLU, with confirmed fitment for Nissan Terrano II and Ford Maverick 4WD models.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3528 |
| Part Number | 6906-2RS |
| Product Type | Deep Groove Ball Bearing – Sealed, Single Row |
| Bore Diameter (d) | 30.00 mm (1.181 inch) |
| Outer Diameter (D) | 47.00 mm (1.850 inch) |
| Width (B) | 9.00 mm (0.354 inch) |
| Enclosure | 2RS – Rubber Seals on Both Sides |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3528
OE Numbers:
6906-2RS
Reference Numbers (Interchange):
SKF: 61906-2RS1, 61906-2RS1/C3
NSK: 6906DDU, 6906DDUC3
NTN: 6906LLU, 6906LLUC3/5K
FAG: 61906-2RSR
Vehicle Fitment
NISSAN TERRANO II (R20): 2.4 4WD 1996-2002
FORD MAVERICK (UDS, UNS): 2.4 i 1993-1996
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Deep groove ball design accommodates radial loads and moderate axial loads in both directions – suitable for automotive and industrial applications.
- 2RS contact seals on both sides provide effective contamination protection – retains lubricant and excludes dirt and moisture.
- Metric configuration with 30 mm bore and 47 mm outer diameter matches OE 6906-2RS for direct replacement.
- Heat-treated GCr15 bearing steel with precision-ground raceways – low friction coefficient and high limiting speed.
- Factory pre-lubricated – no additional greasing required before installation.
Installation Notes
- Confirm bore diameter (30.00 mm) and outer diameter (47.00 mm) match your housing and shaft before installation.
- This is a sealed bearing – do not wash or re-lubricate before installation as the factory-fill grease is pre-installed.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Press the bearing squarely into the housing or onto the shaft – never apply force directly through the rolling elements.
- Torque all fasteners to vehicle manufacturer specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces deep groove ball bearings and automotive components to OE specifications. Contact us
