6905-2RS Wheel Bearing For BENZ
The DUHUI Bearing 6905-2RS is a single-row deep groove ball bearing with a 25 mm bore, 42 mm outer diameter, and 9 mm width. This sealed bearing features contact seals on both sides for effective contamination protection, and is designed for automotive and commercial vehicle applications. It matches OE specifications including NISSAN 23383-Z9003 and ISUZU 5811291140, with cross-references to SKF 61905-2RS1, NSK 6905DDU, and NTN 6905LLU, with confirmed fitment for Mercedes-Benz Actros models.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3527 |
| Part Number | 6905-2RS |
| Product Type | Deep Groove Ball Bearing – Sealed, Single Row |
| Bore Diameter (d) | 25.00 mm (0.984 inch) |
| Outer Diameter (D) | 42.00 mm (1.654 inch) |
| Width (B) | 9.00 mm (0.354 inch) |
| Enclosure | 2RS – Rubber Seals on Both Sides |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3527
OE Numbers:
2130-3302, 5811291140, 23383-Z9003, 23441-25500, 23441-J5500
Reference Numbers (Interchange):
SKF: 61905-2RS1, 69052RS1
NSK: 6905DDU, 6905DDUCM
NTN: 6905LLU, 6905LLU/5K
Koyo: 69052RS
Vehicle Fitment
MERCEDES-BENZ ACTROS: 1835 AK 1997-2002
NISSAN: Various models (verify OE number and dimensions before ordering)
ISUZU: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Deep groove ball design accommodates radial loads and moderate axial loads in both directions – suitable for automotive and commercial vehicle applications.
- 2RS contact seals on both sides provide effective contamination protection – retains lubricant and excludes dirt and moisture.
- Metric configuration with 25 mm bore and 42 mm outer diameter matches OE 6905-2RS for direct replacement.
- Heat-treated GCr15 bearing steel with precision-ground raceways – low friction coefficient and high limiting speed.
- Factory pre-lubricated – no additional greasing required before installation.
Installation Notes
- Confirm bore diameter (25.00 mm) and outer diameter (42.00 mm) match your housing and shaft before installation.
- This is a sealed bearing – do not wash or re-lubricate before installation as the factory-fill grease is pre-installed.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Press the bearing squarely into the housing or onto the shaft – never apply force directly through the rolling elements.
- Torque all fasteners to vehicle manufacturer specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces deep groove ball bearings and automotive components to OE specifications. Contact us
