6309-2RS Wheel Bearing For AGCO
The DUHUI Bearing 6309-2RS deep groove ball bearing is a sealed, single-row replacement component for AGCO agricultural equipment and a wide range of industrial applications. This bearing features rubber seals on both sides for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including AGCO 391968X1, this bearing delivers reliable performance for compatible agricultural machinery and industrial equipment.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB3568 | |
| Part Number | 6309-2RS | |
| Product Type | Deep Groove Ball Bearing | |
| Row Type | Single Row | |
| Bore Diameter (d) | 45.00 mm | 1.772 in |
| Outside Diameter (D) | 100.00 mm | 3.937 in |
| Width (B) | 25.00 mm | 0.984 in |
| Seal Type | 2RS (Double Rubber Seal) | |
| Dynamic Load Rating (Cr) | 52,900 N | |
| Static Load Rating (C0r) | 31,500 N | |
| Limiting Speed – Grease | 4,800 rpm | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3568
OE Numbers:
391968X1
Reference Numbers (Interchange):
FAG: 6309.2RSR
FERODO: 309DD
Koyo: 63092RS, 6309DD
NSK-RHP: 6309DD, 6309DDU
NTN: 6309LL, 6309LLU
SKF: 63092RS, 63092RS1, 63092RSJ
SNR: 6309EE
TIMKEN: 309DD
TRIPLE FIVE: 63092RS
Vehicle Fitment
AGCO: Various agricultural equipment models
Additional compatible applications (verify before ordering):
AGRICULTURAL: Tractors, combines, balers, mowers, sprayers, and other farm machinery requiring a 45×100×25 mm bearing.
INDUSTRIAL: Electric motors, pumps, gearboxes, conveyors, and general industrial machinery.
Please verify OE number, dimensions and application requirements before ordering.
Product Features
- Deep groove ball bearing design accommodates both radial and moderate axial loads in either direction.
- 2RS rubber seals on both sides provide excellent contamination protection and grease retention.
- Pre-lubricated with high-quality grease for immediate installation and extended service life.
- Manufactured from high-carbon chromium bearing steel for durability under load.
- Interchangeable with major brands including SKF, NTN, FAG, and Timken.
Installation Notes
- Confirm bore diameter is 45.00 mm (1.772 in) and outside diameter is 100.00 mm (3.937 in) before installation.
- This bearing is pre-lubricated and sealed – do not wash out the grease.
- Do not attempt to disassemble the bearing or remove the seals – this will cause permanent damage.
- Press the bearing onto the shaft or into the housing using appropriate tools – never strike with a hammer.
- Apply force only to the ring being fitted (inner ring for shaft mounting, outer ring for housing mounting).
- Inspect the shaft and housing surfaces for damage or wear before installing new components.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive and industrial bearing supplier established in Zhejiang, China, in 2003. DUHUI produces deep groove ball bearings and automotive components to OE specifications. Contact us
