62305-2RS1 Wheel Bearing For MITSUBISHI
The DUHUI Bearing 62305-2RS1 deep groove ball bearing is an OE-replacement solution for Mitsubishi vehicles and compatible applications requiring a 25×62×24 mm sealed bearing. This single-row bearing features rubber seals on both sides for enhanced contamination protection and grease retention. Manufactured to match original equipment specifications including MITSUBISHI ME700776 and S930P70070, this bearing is widely interchangeable with major brands including SKF 62305-2RS1 and FAG 62305-2RSR.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB3501 | |
| Part Number | 62305-2RS1 | |
| Product Type | Deep Groove Ball Bearing | |
| Row Type | Single Row | |
| Bore Diameter (d) | 25.00 mm | 0.984 in |
| Outside Diameter (D) | 62.00 mm | 2.441 in |
| Width (B) | 24.00 mm | 0.945 in |
| Seal Type | 2RS1 (Double Rubber Seal) | |
| Dynamic Load Rating (Cr) | 22,500 N | |
| Static Load Rating (C0r) | 11,600 N | |
| Limiting Speed – Grease | 7,500 rpm | |
| Weight | 0.33 kg | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3501
OE Numbers:
ME700776, S930P70070
Reference Numbers (Interchange):
SKF: 62305-2RS1, 62305-2RS1C3
FAG: 62305-2RSR
NSK-RHP: 62305DDU8C3
BOSCH: 1120900043, 1120905007, 1120905043
HC-Cargo: 140715, 140879
WAI: 10-3052-4
Vehicle Fitment
MITSUBISHI: Various models
Additional compatible applications (verify before ordering):
MITSUBISHI: Pajero
INDUSTRIAL: Electric motors, pumps, alternators, and general machinery requiring a 25×62×24 mm deep groove ball bearing.
Please verify OE number, dimensions and application requirements before ordering.
Product Features
- Deep groove ball bearing design accommodates both radial and moderate axial loads in either direction.
- 2RS1 rubber seals on both sides provide effective contamination protection and grease retention.
- Pre-lubricated with high-quality grease for immediate installation and extended service life.
- Manufactured from high-carbon chromium bearing steel for durability under load.
- Precision-ground raceways ensure smooth rotation and long service life.
- Interchangeable with major brands including SKF, FAG, and NSK.
Installation Notes
- Confirm bore diameter is 25.00 mm (0.984 in), outside diameter is 62.00 mm (2.441 in), and width is 24.00 mm (0.945 in) before installation.
- This bearing is pre-lubricated and sealed – do not wash out the grease or remove the seals.
- Do not attempt to disassemble the bearing or remove the seals – this will cause permanent damage.
- Press the bearing onto the shaft or into the housing using appropriate tools – never strike with a hammer.
- Apply force only to the ring being fitted (inner ring for shaft mounting, outer ring for housing mounting).
- Inspect the shaft and housing surfaces for damage or wear before installing new components.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive and industrial bearing supplier established in Zhejiang, China, in 2003. DUHUI produces deep groove ball bearings and automotive components to OE specifications. Contact us
