6208-ZNR Wheel Bearing For FORD
The DUHUI Bearing 6208-ZNR is a single-row deep groove ball bearing with a 40 mm bore, 80 mm outer diameter, and 18 mm width. This automotive wheel bearing features a single metal shield on one side and a snap ring groove on the outer ring for secure axial location in the housing. It matches OE specifications including 6208-ZNR and 173208Z, and is compatible with Ford applications, as well as electric motors, pumps, fans, and general industrial machinery where axial location is required.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3657 |
| Part Number | 6208-ZNR |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 40.00 mm (1.575 inch) |
| Outer Diameter (D) | 80.00 mm (3.150 inch) |
| Width (B) | 18.00 mm (0.709 inch) |
| Snap Ring OD | 86.60 mm (3.409 inch) |
| Snap Ring Width | 1.70 mm (0.067 inch) |
| Seals | Z – Single Metal Shield (One Side) |
| Snap Ring | Fitted on Outer Ring |
| Bearing Material | High Carbon Chrome Steel |
| Cage Material | Pressed Steel Cage |
| Weight | 0.37 kg (0.82 lb) |
| Dynamic Load Rating | 29.1 kN |
| Static Load Rating | 17.8 kN |
| Limiting Speed (Grease) | 8,700 rpm |
| Limiting Speed (Oil) | 10,000 rpm |
| Temperature Range | -40°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3657
OE Numbers:
6208-ZNR, 173208Z
Reference Numbers (Interchange):
NTN: 6208ZNR
SKF: 6208-ZNR
Timken: 6208-Z-NR
FAG: 6208-ZNR
NSK: 6208ZNR
Vehicle Fitment
FORD: Various Ford passenger car and light truck models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance.
- Z – single metal shield on one side provides contamination protection while maintaining low friction for high running speeds.
- Snap ring groove on the outer ring with fitted snap ring simplifies axial location in the housing, eliminating the need for additional positioning components.
- Manufactured to OE specifications with high carbon chrome steel rings and balls, and a pressed steel cage for durability and fatigue resistance.
- Factory-lubricated and maintenance-friendly design.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (40.00 mm) and outer diameter (80.00 mm) match your housing and shaft before installation.
- The snap ring is pre-fitted on the outer ring – verify the snap ring OD matches your housing groove dimensions.
- This bearing has a single metal shield on one side. The shield is non-removable and protects against contamination.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the housing – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Bearing is factory-preserved with oil – if pre-lubricated grease is required, pack with appropriate grease before installation. Install in a clean environment to prevent contamination.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
