6204/22-2RS Wheel Bearing For MITSUBISHI
The DUHUI Bearing 6204/22-2RS is a single-row deep groove ball bearing with a 22 mm bore, 47 mm outer diameter, and 14 mm width. This automotive wheel bearing features rubber seals on both sides and is designed for light-duty automotive wheel hub applications, including Mitsubishi Swift I (1983-1989) models. It matches Mitsubishi OE specifications including ME700208, S930P28201, and S930P28270, and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable sealed bearing solution.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3522 |
| Part Number | 6204/22-2RS |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 22.00 mm (0.866 inch) |
| Outer Diameter (D) | 47.00 mm (1.850 inch) |
| Width (B) | 14.00 mm (0.551 inch) |
| Seals | 2RS – Rubber Seals Both Sides |
| Weight | 0.10 – 0.11 kg (0.22 – 0.24 lb) |
| Bearing Material | Steel |
| Cage Material | Steel Cage |
| Seal Material | Nitrile Rubber (NBR) with Steel Reinforcement |
| Temperature Range | -20°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications from KOYO catalogs. This bearing features a 22 mm bore, which is a non-standard variation of the standard 6204 bearing. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3522
OE Numbers:
MITSUBISHI: ME700208, S930P25770, S930P28201, S930P28270
NISSAN: 01011-00021, 01011-00062, 11944-EB30B, 21023-Z5000, 21023-Z5500, 2338399209
SUZUKI: 08133-62047
IKA: 582227, 882220
Reference Numbers (Interchange):
KOYO: 6204/22-2RS, 6204/1YD2RS
SNR: 6204.2RS
CASCO: CBE58118GS
KLAXCAR FRANCE: 22098z
HONDA: 91073-MCF-003
Vehicle Fitment
MITSUBISHI SWIFT I (AA): 1.0 (SA310, AA41/43) 1983-1989
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance and is suitable for high-speed applications.
- 2RS contact rubber seals on both sides provide excellent protection against dust, moisture, and contaminants while retaining lubricant for the service life of the bearing.
- Factory-lubricated and sealed – maintenance-free design requires no regreasing during service life.
- Direct interchange with multiple major brand equivalents including KOYO 6204/22-2RS and SNR 6204.2RS.
- Steel cage provides reliable ball guidance under load.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (22.00 mm) and outer diameter (47.00 mm) match your hub and axle before installation.
- This bearing is sealed on both sides – seals are non-removable and protect against contamination. Do not attempt to remove or disassemble the seals.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the hub – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation.
- Install in a clean environment to prevent contamination. Even small particles entering the bearing can shorten its service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
