6203-2Z/C3 Wheel Bearing For CHEVROLET
The DUHUI Bearing 6203-2Z/C3 deep groove ball bearing is a standard replacement component for Chevrolet vehicles and a wide range of industrial applications requiring a 17×40×12 mm bearing. This single-row ball bearing features metal shields on both sides (2Z) and a C3 internal clearance rating for elevated operating temperatures. Manufactured to match original equipment specifications including Chevrolet 94648617, this bearing delivers reliable performance for compatible applications.
Technical Specifications
| Specification | mm | inch |
|---|---|---|
| DH Code | DWB3507 | |
| Part Number | 6203-2Z/C3 | |
| Product Type | Deep Groove Ball Bearing | |
| Row Type | Single Row | |
| Bore Diameter (d) | 17.00 mm | 0.669 in |
| Outside Diameter (D) | 40.00 mm | 1.575 in |
| Width (B) | 12.00 mm | 0.472 in |
| Seal Type | 2Z (Double Metal Shield) | |
| Internal Clearance | C3 | |
| Dynamic Load Rating (Cr) | 9,500 N | |
| Static Load Rating (C0r) | 4,800 N | |
| Limiting Speed – Grease | 17,000 rpm | |
| Weight | 0.07 kg | |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3507
OE Numbers:
94648617
Reference Numbers (Interchange):
FAG: 62032ZC3, 6203.2ZR.C3, 6203C2ZC3
NTN: 6203ZZC3
SKF: 62032ZC3, 62032ZC3QE6
Vehicle Fitment
CHEVROLET: Various models
Additional compatible applications (verify before ordering):
INDUSTRIAL: Electric motors, pumps, gearboxes, conveyors, agricultural machinery, and general industrial equipment requiring a 17×40×12 mm bearing with C3 clearance.
Please verify OE number, dimensions and application requirements before ordering.
Product Features
- Deep groove ball bearing design accommodates both radial and moderate axial loads in either direction.
- 2Z metal shields on both sides provide effective contamination protection while minimizing friction.
- C3 internal clearance rating accommodates thermal expansion in high-temperature applications.
- Pre-lubricated with high-quality grease for immediate installation and extended service life.
- Manufactured from high-carbon chromium bearing steel for durability under load.
- Interchangeable with major brands including SKF, FAG, and NTN.
Installation Notes
- Confirm bore diameter is 17.00 mm (0.669 in), outside diameter is 40.00 mm (1.575 in), and width is 12.00 mm (0.472 in) before installation.
- This bearing is pre-lubricated and sealed – do not wash out the grease.
- Do not attempt to disassemble the bearing or remove the shields – this will cause permanent damage.
- Press the bearing onto the shaft or into the housing using appropriate tools – never strike with a hammer.
- Apply force only to the ring being fitted (inner ring for shaft mounting, outer ring for housing mounting).
- Inspect the shaft and housing surfaces for damage or wear before installing new components.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive and industrial bearing supplier established in Zhejiang, China, in 2003. DUHUI produces deep groove ball bearings and automotive components to OE specifications. Contact us
