614450 Wheel Bearing For FIAT
The DUHUI Bearing 614450 wheel bearing is a single-row ball bearing designed for Fiat automotive drivetrain and wheel hub applications. With a 25 mm bore, 52 mm outer diameter, and 15 mm total width, this bearing supports radial and moderate axial loads in automotive wheel hub and transmission positions. It matches Fiat OE specification 614450 and is cross-referenced with SKF, NTN, and SNR equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3495 |
| Part Number | 614450 |
| Product Type | Single Row Ball Bearing |
| Bore Diameter (d) | 25.00 mm (0.984 inch) |
| Outer Diameter (D) | 52.00 mm (2.047 inch) |
| Width (B) | 15.00 mm (0.591 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3495
OE Numbers:
614450
Reference Numbers (Interchange):
SKF: 614450
NTN: 614450
SNR: 614450
Vehicle Fitment
FIAT: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row ball bearing design supports radial and moderate axial loads in both directions – suitable for automotive wheel hub and transmission applications.
- Metric-series configuration with 25 mm bore and 52 mm outer diameter matches Fiat OE 614450 for direct replacement.
- Heat-treated GCr15 bearing steel with precision-ground raceways ensures consistent performance and long service life.
- Open-type design supports splash lubrication and oil bath systems common in drivetrain applications.
- Cross-referenced with SKF, NTN, and SNR equivalents – confirmed interchange available.
Installation Notes
- Confirm bore diameter (25.00 mm) and outer diameter (52.00 mm) match your housing and shaft before installation.
- Inspect the shaft and housing for wear, scoring, or pitting – replace if damage is present.
- Apply appropriate lubricant (grease or oil) during installation – refer to your vehicle service manual for viscosity specifications.
- Ensure correct shaft and housing tolerances for optimal load distribution and service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces ball bearings and automotive components to OE specifications. Contact us
