6013-2RS/C3 Wheel Bearing
The DUHUI Bearing 6013-2RS/C3 is a single-row deep groove ball bearing with a 65 mm bore, 100 mm outer diameter, and 18 mm width. This automotive wheel bearing features contact rubber seals on both sides and C3 internal clearance, designed to accommodate thermal expansion and higher operating temperatures. It matches OE specification 6013-2RS/C3 and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable sealed bearing solution.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3505 |
| Part Number | 6013-2RS/C3 |
| Product Type | Single Row Deep Groove Ball Bearing |
| Bore Diameter (d) | 65.00 mm (2.559 inch) |
| Outer Diameter (D) | 100.00 mm (3.937 inch) |
| Width (B) | 18.00 mm (0.709 inch) |
| Weight | 0.44 kg (0.97 lb) |
| Seals | 2RS – Rubber Seals Both Sides |
| Internal Clearance | C3 – Larger Than Normal |
| Bearing Material | Chrome Steel |
| Cage Material | Steel / Sheet Metal Cage |
| Dynamic Load Rating | 31.9 – 32.5 kN |
| Static Load Rating | 24.5 – 25.0 kN |
| Limiting Speed | 3,500 – 4,000 rpm |
| Temperature Range | -40°C to +100°C |
Note: Dimensional data is based on manufacturer published specifications from SKF, Peer, and RICH catalogs. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3505
OE Numbers:
6013-2RS/C3
Reference Numbers (Interchange):
SKF: 6013-2RS1/C3, 6013-2RSJEM
Peer: 6013-2RLD-C3-V2
FAG: 6013-2RSR-C3
NSK: 6013DDUC3
ISB: 6013-2RS/C3
RICH: 6013-2RS-C3
Nachi: 6013-2NSE/C3
NTN: 6013LLUC3
KOYO: 6013-2RSC3
Vehicle Fitment
Please verify OE number, dimensions and vehicle configuration before ordering. Fitment data is not available for this part number.
Known OE References (Industrial):
CLAAS: 0002148260
JOHN DEERE: AZ46129, CH18554, ER027659
VALTRA: C5NN7N046A
Product Features
- Single-row deep groove ball bearing design supports radial loads and moderate axial loads in both directions. Simple and robust construction requires little maintenance.
- 2RS contact rubber seals on both sides provide excellent protection against dust, moisture, and contaminants while retaining lubricant for the service life of the bearing.
- C3 internal clearance provides a larger-than-normal clearance to accommodate thermal expansion and higher operating temperatures, reducing the risk of seizure during operation.
- Manufactured to OE specifications with chrome steel rings and balls, and a steel sheet metal cage for durability and fatigue resistance.
- Factory pre-lubricated and sealed – maintenance-free design requires no regreasing during service life.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (65.00 mm) and outer diameter (100.00 mm) match your housing and shaft before installation.
- This bearing is sealed on both sides – seals are non-removable and protect against contamination.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the housing or onto the shaft – never apply force directly through the rolling elements.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation.
- For applications requiring higher temperature operation, verify the temperature range (-40°C to +100°C) meets your requirements.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
