594/592A Wheel Bearing For VOLVO
The DUHUI Bearing 594/592A is a single-row tapered roller bearing with a 95.25 mm inner diameter, 152.4 mm outer diameter, and 39.7 mm overall width. This automotive wheel bearing is designed for combined radial and axial loads and is commonly used in wheel hub and axle applications on Volvo FL6 and FS7 commercial vehicles. It matches Volvo OE specifications 181298 and 181128, and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable heavy-duty bearing solution.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2448 |
| Part Number | 594/592A (SET216) |
| Product Type | Single Row Tapered Roller Bearing |
| Bore Diameter (d) | 95.25 mm (3.750 inch) |
| Outer Diameter (D) | 152.40 mm (6.000 inch) |
| Total Width (T) | 39.70 mm (1.563 inch) |
| Cone Width (B) | 36.32 mm (1.430 inch) |
| Cup Width (C) | 30.16 mm (1.187 inch) |
| Weight | 2.55 kg (5.62 lb) |
| Cage Material | Sheet Metal |
| Dynamic Load Rating | 197 – 237 kN |
| Static Load Rating | 305 – 315 kN |
| Limiting Speed | 4,300 rpm |
| Temperature Range | -40°C to 120°C |
Note: Dimensional data is based on manufacturer published specifications from SKF, Timken, and FAG catalogs. The cone is 594 and the cup is 592A. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2448
OE Numbers:
VOLVO: 181298, 181128, 183704
Reference Numbers (Interchange):
SKF: VKHB 2040, 594/592 A
Timken: SET216, 594/592A
FAG: K594.592A
Fersa: 594/592 A
NTN: 594/592A
Vehicle Fitment
VOLVO FL6: FL 618 (1995-2000)
VOLVO FS7: FS 718/230 (1994-1996), FS 718/260 (1994-1996)
VOLVO FL7: Various commercial vehicle applications
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller bearing design accommodates high radial and axial loads in one direction. The conical raceways allow these versatile bearings to support combined loads effectively.
- Separable cone and cup components simplify mounting, dismounting, and maintenance. The cone unit consists of an inner ring with cage and roller set, while the cup is the outer ring.
- Manufactured to OE specifications with case carburized steel for durability and fatigue resistance.
- Sheet metal cage provides reliable roller guidance under load.
- Direct interchange with multiple major brand equivalents including SKF VKHB 2040, Timken SET216, and FAG K594.592A.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm inner diameter (95.25 mm) and outer diameter (152.40 mm) match your housing and shaft before installation.
- This is a single-row tapered roller bearing – these bearings must be mounted in mirror-image arrangement together with a second tapered roller bearing. Paired bearing sets can be applied in X, O, or tandem arrangements.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the cone onto the shaft and the cup into the housing – never apply force directly through the rolling elements.
- Proper bearing preload is critical for tapered roller bearings – refer to the Volvo service manual for torque specifications.
- Pack the bearing with high-quality grease before installation if not pre-lubricated.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
