5206-2RS Wheel Bearing For HONDA
The DUHUI Bearing 5206-2RS is a double-row angular contact ball bearing with a 30 mm bore, 62 mm outer diameter, and 23.8 mm width. This automotive wheel bearing features rubber seals on both sides for contamination protection and is designed for applications requiring higher load capacity in compact assemblies. It matches Honda OE specification 5206-2RS and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable bearing solution .
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3647 |
| Part Number | 5206-2RS |
| Product Type | Double Row Angular Contact Ball Bearing |
| Bore Diameter (d) | 30.00 mm (1.181 inch) |
| Outer Diameter (D) | 62.00 mm (2.441 inch) |
| Width (B) | 23.80 mm (0.937 inch) |
| Seals | 2RS – Rubber Seals Both Sides |
| Weight | 0.55 kg (1.21 lb) |
| Bearing Material | Chrome Steel |
| Dynamic Load Rating (Cr) | 25.9 kN |
| Static Load Rating (C0r) | 18.7 kN |
| Limiting Speed (Grease) | 8,000 rpm |
| Contact Angle | 30° |
Note: Dimensional data is based on manufacturer published specifications from PFI Bearings, Motion Industries, and VXB catalogues . This is a double-row angular contact ball bearing – it accommodates both radial and axial loads. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3647
OE Numbers:
HONDA: 5206-2RS
Reference Numbers (Interchange):
NTN: 5206CLLUC3
NSK: 5206FF
TIMKEN: 5206KE
MRC: 5206-SBKFF
FEDERAL: FSA55506
PFI: 5206-2RS C3
Vehicle Fitment
HONDA: Various passenger car and SUV applications
VOLVO: N10 (1980-1991), N12 (1980-1991), NL10 (1991-1999), NL12 (1991-1999) – Rear wheel applications
SUZUKI: LT-Z400 QuadSport Z, LT-Z400 QuadSport Z LE – Transmission applications
AGRICULTURAL: John Deere, Amazone, Farmet equipment
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Double-row angular contact ball bearing design provides increased load-carrying capacity and improved radial and axial stability compared to single-row bearings .
- 2RS rubber seals on both sides provide enhanced protection against contaminants and ensure improved sealing performance, retaining lubrication and preventing ingress of dust, dirt, and moisture .
- 30° contact angle efficiently manages both radial and axial loads in compact assemblies, making it suitable for demanding machinery applications.
- Manufactured to OE specifications with chrome steel for resistance and durability .
- Direct interchange with multiple major brand equivalents including NTN 5206CLLUC3, NSK 5206FF, and Timken 5206KE .
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (30.00 mm) and outer diameter (62.00 mm) match your housing and shaft before installation.
- This is a double-row angular contact bearing – ensure correct orientation during installation. Do not attempt to disassemble the sealed unit.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the bearing into the housing – never apply force directly through the rolling elements. Do not use a hammer to strike the bearing.
- Bearing is factory-lubricated and sealed – no additional greasing required before installation.
- Install in a clean environment to prevent contamination. Even small particles entering the bearing can shorten its service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
