513382 Wheel Hub Bearing For Mitsubishi
The DUHUI 513382 wheel hub bearing is a direct-fit replacement designed for Mitsubishi vehicles. This third-generation front wheel hub bearing is a pre-greased, sealed unit engineered for durability and ease of installation. Its design incorporates a 5-bolt flange and is non-integral ABS, making it suitable for vehicles requiring a separate ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH11042 |
| Part Number | 513382 |
| Position | Front Axle |
| Design Type | Third Generation (Gen 3) |
| Inside Diameter | 80.00 mm (3.150 inch) |
| Outside Diameter | 140.50 mm (5.531 inch) |
| Bolt Holes | 5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Not Integrated |
| Pre-Lubricated | Yes |
Note: This is a third-generation (Gen 3) front wheel hub bearing assembly featuring a 5-bolt flange. It does not include an integrated ABS sensor. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH11042
OE Numbers: 513382, 31202284235
Reference Numbers (Interchange):
MITSUBISHI: 31202284235
MOOG: 513382
Vehicle Fitment
MITSUBISHI: Various models
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Third-generation (Gen 3) wheel hub bearing engineered for Mitsubishi applications
- 5-bolt flange design provides enhanced load distribution and stability
- Factory pre-greased and sealed for maintenance-free operation
- Double-row bearing design delivers consistent performance under varying loads
- Non-integral ABS sensor configuration – uses separate vehicle ABS sensor
- Direct interchange with OE numbers 513382 and 31202284235 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 513382 or 31202284235 before installation
- This is a Gen 3 hub bearing – confirm the 5-bolt flange matches your Mitsubishi front hub
- This hub assembly does not include an integrated ABS sensor – ensure the vehicle’s separate ABS sensor is properly installed and aligned
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Mitsubishi service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
