513265 Wheel Hub Bearing For FAW
The DUHUI 513265 wheel hub bearing is a direct-fit front axle replacement designed for FAW Prius models. This front wheel hub bearing meets OE specifications 513265 and 4351047011, and is directly interchangeable with Toyota Prius (2004-2009) applications. It delivers reliable performance in the aftermarket.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1454 |
| Part Number | 513265 / 4351047011 |
| Position | Front Axle |
| Outer Diameter | 125.00 mm (4.921 inch) |
| Height | 42.00 mm (1.654 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.5 |
| Flange Bolt Hole Quantity | 4 |
| Spline Quantity | 26 |
| Wheel Pilot Diameter | 54.00 mm (2.126 inch) |
| Brake Pilot Diameter | 55.00 mm (2.165 inch) |
| ABS Sensor | Not Included |
Note: This is a front wheel hub bearing assembly with 5-lug bolt pattern and 26 splines. The OE number 4351047011 is a Toyota factory number for Prius applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1454
OE Numbers: 513265, 4351047011, 4351047010, 4351047012
Reference Numbers (Interchange):
TOYOTA: 4351047010, 4351047011, 4351047012
MOOG: 513265
Mevotech: H513265
GSP: 694265, 691070
BCA: 513265
BR930641
VKBA6924
HA590064
Vehicle Fitment
FAW: Prius
TOYOTA: Prius (2004-2009) – Base and Touring trims, 1.5L 1NZ-FXE engine
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for FAW Prius and compatible with Toyota Prius (2004-2009) applications
- 5-lug bolt pattern with M12 x 1.5 wheel studs and 26-spline input shaft for precise fitment
- Integral raceway design (Gen 3 bearing technology) enhances product life and durability
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 513265, 4351047011, 4351047010, and 4351047012
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 513265 or 4351047011 before installation
- Confirm front axle fitment for your specific FAW Prius or Toyota Prius (2004-2009) model
- Inspect the drive axle splines for wear or damage before fitting the new bearing
- Clean the hub mounting surface and steering knuckle thoroughly before installation
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to FAW / Toyota service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
