513084 Wheel Hub Bearing For Jeep
The DUHUI 513084 wheel hub bearing is a direct-fit front axle replacement designed for Jeep Cherokee, Grand Cherokee, Wrangler, and Comanche models from the 1990s. This front wheel hub bearing meets OE specifications 513084, 53007449AB, and 53007449AC, delivering reliable performance in the aftermarket. It features a 27-spline design and triangular 3-bolt flange for secure mounting.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH11050 |
| Part Number | 513084 |
| Position | Front Axle |
| Flange Diameter | 153.50 mm (6.043 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Wheel Pilot Diameter | 71.40 mm (2.812 inch) |
| Brake Pilot Diameter | 71.90 mm (2.832 inch) |
| Flange Offset | 54.30 mm (2.133 inch) |
| Hub Pilot Diameter | 100.13 mm (3.942 inch) |
| Flange Bolt Hole Quantity | 3 |
| Flange Shape | TRIANGULAR |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | 1/2-20 UNF |
| Spline Quantity | 27 |
| ABS Sensor | Not Included |
| Bearing Generation | Gen 3 |
Note: This is a Gen 3 front wheel hub bearing assembly with a triangular 3-bolt flange and 27-spline input shaft. This unit does not include an integral ABS sensor. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH11050
OE Numbers: 513084, 53007449AB, 53007449AC
Reference Numbers (Interchange):
JEEP: 53007449AB, 53007449AC
CHRYSLER: 53007449AB
FIAT / LANCIA: K53007449AB, K53007449AC
MOOG: 513084
Mevotech: H513084
Timken: 513084
SKF: BR930014
GSP: 104084
Centric: 400.58001
Duralast: DL513084
Vehicle Fitment
JEEP: Cherokee (1989-1999), Comanche (1990-1992), Grand Cherokee (1993-1998), Wagoneer (1990, 1993), Wrangler (1990-1995, 1997-1999)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered specifically for 1990s Jeep Cherokee, Grand Cherokee, Wrangler, and Comanche models
- Triangular 3-bolt flange design provides secure mounting to the steering knuckle
- 27-spline input shaft ensures precise engagement with the drive axle
- Gen 3 bearing technology with integrated flange for simplified installation
- 5-lug bolt pattern with 1/2-20 UNF wheel studs
- Factory pre-loaded and pre-lubricated – no manual adjustment required
- Multi-lip seal design provides contamination protection and retains lubricant
- Direct interchange with OE numbers 513084, 53007449AB, and 53007449AC for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 513084, 53007449AB, or 53007449AC before installation
- This is a non-ABS hub assembly – confirm your vehicle’s ABS configuration before ordering
- Confirm the triangular 3-bolt flange and 27-spline input shaft match your Jeep model
- Inspect the drive axle splines for wear or damage before fitting the new bearing
- Clean the hub mounting surface and steering knuckle thoroughly before installation
- Torque the three flange bolts and axle nut to Jeep service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
