512512 Rear Wheel Hub Assembly For Toyota
The DUHUI Bearing 512512 rear wheel hub assembly (DWH1729) is a direct-fit OE replacement designed for Toyota Matrix, Corolla, and compatible front-wheel-drive models. This rear wheel hub assembly includes the hub and bearing as a complete unit. Manufactured to match original equipment specifications including Toyota 42410-12250, this wheel hub assembly delivers reliable performance for these popular Japanese compact car applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH1729 |
| Part Number | 512512 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Rear Axle |
| Flange Diameter | 134.90 mm (5.311 inch) |
| Brake Pilot Diameter | 55.00 mm (2.165 inch) |
| Spline Count | 26 |
| Drive Type | FWD / 4WD |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH1729
OE Numbers:
512512, 42410-12250
Reference Numbers (Interchange):
SKF: BR930920
MOOG: HA590002
GMB: 1082-12150T
A.B.S.: 996862
Vehicle Fitment
TOYOTA MATRIX (E13): 2002–2008
Hatchback – FWD / 4WD
1.8L (1ZZ-FE) – 2002-2008
TOYOTA COROLLA (E12): 2002–2007
Saloon / Hatchback – FWD
1.6L (3ZZ-FE) – 2002-2007
1.8L (1ZZ-FE) – 2002-2007
TOYOTA COROLLA (E13): 2006–2013
Saloon – FWD
1.8L (2ZR-FE) – 2006-2013
PONTIAC VIBE: 2003–2009
Hatchback – FWD / 4WD
1.8L – 2003-2009
Position: Rear Axle (both driver and passenger sides)
Important Notes:
– This assembly covers one wheel; order two for a full axle.
– Assembly includes hub and bearing as a complete unit.
– Features 26-spline design for optimal torque transfer.
– Compatible with FWD and 4WD variants of the listed models.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for Toyota Matrix and Corolla rear axle. Matches Toyota specification 42410-12250.
- 26-spline design improves contact area with the axle – provides better torque transfer for 4WD applications.
- Brake pilot diameter of 55.00 mm matches target brake rotor and caliper sizes – delivers smooth, consistent braking response.
- Flange diameter of 134.90 mm provides a large contact area with the suspension – improves load-bearing capability for everyday cargo and passenger transport.
- Engineered with rugged bearing, lubricant, and seal design to support the additional weight and driving forces of front-wheel-drive vehicles.
Installation Notes
- Verify your vehicle is a compatible Toyota Matrix, Corolla, or Pontiac Vibe model before ordering.
- This assembly fits both rear driver and passenger sides. Sold individually.
- Ensure the hub mounting surface on the axle beam is clean and free of corrosion before installation.
- Verify spline count (26) matches your axle specifications before installation.
- Torque the hub mounting bolts and axle nut to manufacturer specifications (refer to service manual). Do not use an impact wrench for final tightening.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies and related components to OE specifications. Contact us
