48575-2B000 Center Support Bearing For HYUNDAI
This 48575-2B000 center support bearing (also known as a carrier bearing or bracket bearing) provides a direct-fit replacement for Hyundai Santa Fe and Tucson models. It supports the driveshaft at the center point, reduces driveline vibration, and protects universal joints from premature wear. This bearing matches OE specifications including Hyundai part number 48575-2B000.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 48575-2B000 |
| Bearing Type | Center Support Bearing |
| Inside Diameter | 1.181″ / 30.00 mm |
| Width | 0.630″ / 16.00 mm |
| Bolt Hole Center | 7.000″ / 177.80 mm |
The inside diameter of 1.181 inches (30.00 mm) is the critical fitment spec for this bearing—this determines whether the bearing seats properly on your driveshaft. The bolt hole center measurement of 7.000 inches (177.80 mm) determines whether the bracket aligns with your vehicle’s chassis mounting points.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Number & Reference Numbers
DH Code:
OE Numbers:
48575-2B000, 49575-2B000, 49575-2B010, 49300-2B500
Reference Numbers (Interchange):
NTN: 49575-2B000
A-Premium: 49300-2B500
Mando: 49575-2B010
Vehicle Fitment
HYUNDAI: Santa Fe (2005-2012), Tucson (2004-2010)
Fitment note: Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement. This bearing matches Hyundai OE specifications including 48575-2B000, 49575-2B000, and 49575-2B010 for Santa Fe and Tucson models.
- Driveline support. Supports the driveshaft to ensure stability and reduce vibration during high-speed rotation.
- Universal joint protection. Helps protect the universal joint and extend its service life.
- Durable construction. Built to withstand radial and axial loads for reliable performance.
- Precision engineered. Manufactured to meet or exceed OE specifications for consistent quality and proper fit.
Installation Notes
- Verify fitment. Confirm this bearing matches your original bearing specifications before installation.
- Check your vehicle configuration. This bearing is designed for Hyundai Santa Fe (2005-2012) and Tucson (2004-2010) models.
- Verify the inside diameter. This bearing is designed for a 30mm (1.181″) bearing opening. If your vehicle has a different size, this part won’t fit.
- Check mounting hole spacing. This bearing has a bolt hole center of 7.000 inches (177.80 mm). Verify against your vehicle’s bracket before ordering.
- Proper alignment is critical. Ensure correct alignment during installation to prevent premature wear and driveline vibration.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces center support bearings, wheel hub bearings, and related components to OE specifications. Contact us
For fitment questions, compare your old part number against the OE numbers listed above.
