40202JY00AABS Wheel Hub Bearing For Nissan
The DUHUI 40202JY00AABS wheel hub bearing is a direct-fit front axle replacement designed for Nissan Juke, Qashqai, and X-Trail models. This front wheel hub bearing meets OE specifications 40202JY00AABS, 402021KA0A, 402023US0A, and 402025SK0A, delivering reliable performance in the aftermarket. It features an integrated ABS ring with 96 teeth for seamless compatibility with vehicle ABS systems.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01544 |
| Part Number | 40202JY00AABS |
| Position | Front Axle |
| Outer Diameter 1 | 136.00 mm (5.354 inch) |
| Inner Diameter 1 | 30.00 mm (1.181 inch) |
| Width 1 | 75.20 mm (2.961 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Bolt Holes | 5 |
| ABS Ring Teeth | 96 |
| Weight | 3.21 kg (7.08 lbs) |
| Thread Size | M12 x 1.25 |
| Joint Flange Count | 4 |
Note: This front wheel hub bearing features a 5-bolt flange with M12 x 1.25 wheel studs and an integrated 96-tooth ABS tone ring. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01544
OE Numbers: 40202JY00AABS, 402021KA0A, 402023US0A, 402025SK0A
Reference Numbers (Interchange):
NISSAN: 40202JY00AABS, 402021KA0A, 402023US0A, 402025SK0A
Vehicle Fitment
NISSAN: Juke (F15) 1.6 DIG-T (2010-2019), Qashqai / Qashqai+2 I (J10) 1.5 dCi (2008-2010), X-Trail II (T31) 2.0 4×4 (2007-2013)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for Nissan Juke, Qashqai, and X-Trail applications
- Integrated 96-tooth ABS tone ring for seamless compatibility with vehicle ABS systems
- 5-bolt flange design with M12 x 1.25 wheel studs provides enhanced load distribution
- 4-joint flange configuration ensures secure mounting
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 40202JY00AABS, 402021KA0A, 402023US0A, and 402025SK0A for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 40202JY00AABS, 402021KA0A, 402023US0A, or 402025SK0A before installation
- Confirm front axle fitment for your specific Nissan model
- Ensure the ABS sensor is properly aligned with the 96-tooth tone ring during installation
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Nissan service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
