37230-22140 Center Support Bearing For TOYOTA
This 37230-22140 center support bearing (also known as a carrier bearing or bracket bearing) provides a direct-fit replacement for Toyota Cressida X80-series models. It supports the driveshaft at the center point, reduces driveline vibration, and protects universal joints from premature wear. This bearing matches OE specification Toyota 37230-22140.
Technical Specifications
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
| Specification | Value / Detail |
|---|---|
| DH Code | |
| Part Number | 37230-22140 |
| Bearing Type | Center Support Bearing |
| Inside Diameter | 1.181″ / 30.00 mm |
| Bolt Hole Center | 5.906″ / 150.00 mm |
| Bracket Included | Yes |
The inside diameter of 1.181 inches (30.00 mm) is the critical fitment spec for this bearing—this determines whether the bearing seats properly on your driveshaft. The bolt hole center measurement of 5.906 inches (150.00 mm) determines whether the bracket aligns with your vehicle’s chassis mounting points.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Number & Reference Numbers
DH Code:
OE Numbers:
37230-22140
Reference Numbers (Interchange):
Toyota: 37230-22140
Vehicle Fitment
TOYOTA: Cressida (RX80, LX80, GX81, RX80V)
Fitment note: Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement. This bearing matches Toyota OE specification 37230-22140 for Cressida X80-series models.
- Driveline support. Supports the driveshaft to ensure stability and reduce vibration during high-speed rotation.
- Universal joint protection. Helps protect the universal joint and extend its service life.
- Durable construction. Built to withstand radial and axial loads for reliable performance.
- Bracket included. The bearing comes with the mounting bracket—you won’t need to reuse your old bracket.
Installation Notes
- Verify fitment. Confirm this bearing matches your original bearing specifications before installation.
- Check your vehicle configuration. This bearing is designed for Toyota Cressida (RX80, LX80, GX81, RX80V) models.
- Verify the inside diameter. This bearing is designed for a 30mm (1.181″) bearing opening. If your vehicle has a different size, this part won’t fit.
- Proper alignment is critical. Ensure correct alignment during installation to prevent premature wear and driveline vibration.
- Inspect related components. Check the driveshaft and universal joints for wear before installing the new bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces center support bearings, wheel hub bearings, and related components to OE specifications. Contact us
For fitment questions, compare your old part number against the OE numbers listed above.
