32906 Wheel Bearing For HONDA
The DUHUI Bearing 32906 wheel bearing is a metric-series single-row tapered roller bearing with a 30 mm bore, 47 mm outer diameter, and 12 mm total width. Designed for automotive transmission and light-duty wheel hub applications, this bearing supports combined radial and axial loads. It matches Honda OE specification 32906 and is interchangeable with SKF 32906, FAG 32906, and Timken equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2364 |
| Part Number | 32906 |
| Product Type | Tapered Roller Bearing – Single Row, Metric Series |
| Bore Diameter (d) | 30.00 mm (1.181 inch) |
| Outer Diameter (D) | 47.00 mm (1.850 inch) |
| Total Width (T) | 12.00 mm (0.472 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on SKF and Timken published specifications for the 32906 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2364
OE Numbers:
32906
Reference Numbers (Interchange):
SKF: 32906
FAG: 32906
Timken: 32906
NTN: 4T-32906
NSK: HR32906J
Vehicle Fitment
HONDA: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for automotive transmission and light-duty wheel hub applications.
- Metric-series configuration with 30 mm bore and 47 mm outer diameter matches SKF 32906, FAG 32906, and Timken 32906 equivalents for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance.
- Open-type configuration supports splash lubrication systems common in transmission applications.
Installation Notes
- Confirm bore diameter (30.00 mm) and outer diameter (47.00 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to vehicle manufacturer specifications – tapered rollers require proper adjustment for transmission and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the Honda service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
