32234 Wheel Bearing For VOLVO
The DUHUI Bearing 32234 wheel bearing is a metric-series single-row tapered roller bearing designed for heavy-duty Volvo commercial vehicle drivetrain applications. With a 170 mm bore, 310 mm outer diameter, and 91 mm total width, this bearing supports combined radial and axial loads in wheel hub and axle positions. It matches Volvo OE specification 32234 and is cross-referenced with standard industry designations for this bearing series.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2607 |
| Part Number | 32234 |
| Product Type | Tapered Roller Bearing – Single Row, Metric Series |
| Bore Diameter (d) | 170.00 mm (6.693 inch) |
| Outer Diameter (D) | 310.00 mm (12.205 inch) |
| Total Width (T) | 91.00 mm (3.583 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications for the 32234 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2607
OE Numbers:
32234
Reference Numbers (Interchange):
VOLVO: 32234
Vehicle Fitment
VOLVO: Various commercial vehicle models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for heavy-duty truck and bus wheel hub and axle applications.
- Metric-series configuration with 170 mm bore and 310 mm outer diameter matches Volvo OE 32234 specifications for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated bearing steel with precision-ground raceways – designed to handle the high loads and torque demands of heavy-duty commercial vehicle drivetrains.
- Open-type configuration supports splash lubrication and oil bath systems common in heavy-duty axle and hub applications.
Installation Notes
- Confirm bore diameter (170.00 mm) and outer diameter (310.00 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Set bearing preload according to Volvo manufacturer specifications – tapered rollers require proper adjustment for axle and wheel hub operation.
- Lubricate with high-quality gear oil or grease – refer to the Volvo service manual for viscosity grade and lubrication method.
- When paired with a second tapered roller bearing, mount in mirror-image arrangement to accommodate axial loads in both directions.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces tapered roller bearings and automotive components to OE specifications. Contact us
