31314 Wheel Bearing
The DUHUI Bearing 31314 is a single-row tapered roller bearing with a 70 mm bore, 150 mm outer diameter, and 38 mm total width. Designed for combined radial and axial loads, this automotive wheel bearing is commonly used in wheel hubs, transmissions, differentials, and pinion shafts. It matches OE specification 31314 and serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable bearing solution.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2500 |
| Part Number | 31314 |
| Product Type | Single Row Tapered Roller Bearing |
| Bore Diameter (d) | 70.00 mm (2.756 inch) |
| Outer Diameter (D) | 150.00 mm (5.906 inch) |
| Cone Width (B) | 35.00 mm (1.378 inch) |
| Cup Width (C) | 25.00 mm (0.984 inch) |
| Total Width (T) | 38.00 mm (1.496 inch) |
| Weight | 2.90 – 2.95 kg |
| Cage Material | Stamped Steel Cage |
Note: Dimensional data is based on manufacturer published specifications from SKF and Timken catalogs. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2500
OE Numbers:
31314
Reference Numbers (Interchange):
SKF: 31314 J2/QCL7A, 31314 J2/QCL7ADF
Timken: 31314-9X026, 31314-9X245
FAG: 31314-XL, 31314A
KOYO: 30314D
NTN: 4T-30314D
ZKL: 31314A, 31314 ZKL
FERSA: 31314-F
Vehicle Fitment
Please verify OE number, dimensions and vehicle configuration before ordering. Fitment data is not available for this part number.
Product Features
- Single-row tapered roller bearing design accommodates high radial and axial loads in one direction.
- Separable cone and cup components simplify mounting, dismounting, and maintenance.
- Manufactured to OE specifications with high-carbon chromium bearing steel for durability and fatigue resistance.
- Stamped steel cage provides reliable roller guidance under load.
- Direct interchange with OE number 31314 and multiple major brand equivalents.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Confirm bore diameter (70.00 mm) and outer diameter (150.00 mm) match your housing and shaft before installation.
- This is a single-row tapered roller bearing – verify your application requires this configuration and check the required preload specifications.
- Inspect the housing and shaft surfaces for wear or damage before installing new components.
- Apply even pressure when pressing the cone onto the shaft and the cup into the housing – never apply force directly through the rolling elements.
- Proper bearing preload is critical for tapered roller bearings – refer to the vehicle service manual for torque specifications.
- Pack the bearing with high-quality grease before installation if not pre-lubricated.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
