3006329 Wheel Hub Bearing For AUDI SEAT VW BRILLIANCE
The DUHUI 3006329 wheel hub bearing is a direct-fit front axle replacement designed for AUDI A4/A6/A8, SEAT EXEO, VW PASSAT, and BRILLIANCE Splendor/Coupe models. This front wheel hub bearing meets OE specification 3006329 and is directly interchangeable with 4D0407625D/4D0407625H[citation:1][citation:3], delivering reliable performance in the aftermarket. It features a 4-bolt flange design for precise fitment.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01328 |
| Part Number | 3006329 |
| Position | Front Axle |
| Bolt Holes | 4 |
| Inner Diameter | 43.00 mm (1.693 inch) |
| Outer Diameter | 82.00 mm (3.228 inch) |
| Width | 40.25 mm (1.585 inch) |
Note: This front wheel hub bearing features a 4-bolt flange and is compatible with select AUDI, SEAT, VW, and BRILLIANCE models. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01328
OE Numbers: 3006329, 4D0407625D, 4D0407625H, 8D0498625C, 8E0498625A, 8E0498625B
Reference Numbers (Interchange):
AUDI: 4D0407625D, 4D0407625H, 8D0498625C, 8E0498625A, 8E0498625B, 8E0598625B
SEAT: 8E0498625B
VW: 4D0407625D, 4D0407625H, 8D0498625C, 8E0498625A, 8E0498625B
BRILLIANCE: 3006329
SKF: VKBA3536
Vehicle Fitment
AUDI: A4 (2000-2008), A6 (1997-2005), A8 (1996-2002)
SEAT: EXEO (2008-2013)
VW: PASSAT (2001-2004)
BRILLIANCE: Splendor, Coupe (pre-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for AUDI, SEAT, VW, and BRILLIANCE applications
- 4-bolt flange design provides precise fitment and secure mounting
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 3006329, 4D0407625D, 4D0407625H, 8D0498625C, 8E0498625A, and 8E0498625B for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 3006329, 4D0407625D, 4D0407625H, 8D0498625C, 8E0498625A, or 8E0498625B before installation
- Confirm the 4-bolt flange matches your vehicle’s front hub
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to manufacturer service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and ensure no abnormal noise
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
