22234 Wheel Bearing For VOLVO
The DUHUI Bearing 22234 spherical roller bearing is designed for heavy-duty applications requiring high radial load capacity and accommodation of shaft misalignment. With a 150 mm bore, 225 mm outer diameter, and 56 mm width, this bearing supports the needs of Volvo commercial vehicle drivetrains. It matches Volvo OE specification 22234 and is cross-referenced with standard spherical roller bearing designations in the industry.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2608 |
| Part Number | 22234 |
| Product Type | Spherical Roller Bearing |
| Bore Diameter (d) | 150.00 mm (5.906 inch) |
| Outer Diameter (D) | 225.00 mm (8.858 inch) |
| Width (B) | 56.00 mm (2.205 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
Note: Dimensional data is based on manufacturer published specifications for the 22234 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2608
OE Numbers:
22234
Reference Numbers (Interchange):
VOLVO: 22234
Vehicle Fitment
VOLVO: Various commercial vehicle models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Spherical roller design accommodates shaft misalignment and housing deflections – suitable for heavy-duty commercial vehicle drivetrain applications.
- High radial load capacity with ability to handle axial loads in both directions.
- Self-aligning capability reduces stress on bearings and housings.
- Heat-treated bearing steel with precision-ground raceways ensures consistent performance and wear resistance.
- Open-type configuration supports splash lubrication and oil bath systems common in heavy-duty applications.
Installation Notes
- Confirm bore diameter (150.00 mm) and outer diameter (225.00 mm) match your existing bearing and housing before installation.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Apply appropriate lubricant (gear oil or grease) – refer to the Volvo service manual for viscosity grade and lubrication method.
- Ensure proper shaft and housing tolerances for optimal load distribution and service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces spherical roller bearings and automotive components to OE specifications. Contact us
